Philips HF3490 User manual - Page 14

10 English General description (Fig. 4) A Vents B Lamp housing C Power cord D Antenna E Display 1 Light symbol 2 Hour indication of clock time/alarm time 3 Clock time symbol 4 Alarm symbol 5 iPod/iPhone symbol 6 Radio symbol 7 'Birds' sound symbol 8 'Beep' sound symbol 9 'African jungle' sound symbol 10 'Wind chimes' sound symbol 11 Dusk simulation symbol 12 Display brightness symbol 13 Minute indication of clock/alarm time 14 Sound level symbol F Dials on the side of the appliance 1 Top dial: light on/off and light intensity 2 Middle dial: menu and radio frequency 3 Bottom dial: radio on/off and volume G Control lever with 'alarm off ','alarm on' and 'snooze' positions H Base I iPod/iPhone docking station J Release slide Preparing for use Installing the appliance Note:You can also use the Wake-up Light without the base.You only have to install the base when you want to use the Wake-up Light in combination with your iPod/iPhone. 1 Hold the Wake-up Light above the base. Note: Make sure that the iPod/iPhone station is on the left side of the Wake-up Light. 2 Align the holes in the bottom of the Wake-up Light with the pins on the base.Then push the Wake-up Light onto the pins ('click') (Fig. 5). -- To remove the base, remove iPod/iPhone, turn the Wake-up Light upside down and push the release slide on the bottom of the base in the direction of the arrow.Then pull the base off the Wake-up Light (Fig. 6). 3 Place the Wake-up Light 16-20in/40-50cm from your head, for example on a bedside table (Fig. 7). 4 Put the plug in the wall outlet. -- The hour indication on the display starts flashing to indicate that you have to set the clock time (Fig. 8). Setting the clock time You cannot use the Wake-up Light until you have set the clock time. 09_HF3490_Oct.indd 10 10/15/09 12:54:04 PM