Philips HTS8140 User Manual - Page 20

Find the correct viewing channel Note • Before you start, remove the door stop tag on top of the disc compartment door. 1 Press 2 to turn on the DVD Home Theatre unit. 2 Press DISC to switch to disc mode 3 Turn on the TV and switch it to the correct video-in channel. • You may go to the lowest channel on your TV, then press the Channel Down button on your TVs remote control until you see the Video In channel. • You may press ° button repeatedly on your TVs remote control. • Usually this channel is between the lowest and highest channels and may be called FRONT, A/V IN, VIDEO, etc.. Tips • Refer to your TVs user manual on how to select the correct input on your TV. Start Ambisound setup When you turn on this unit for the first time, follow the instructions on the TV to complete the Ambisound setup in order to obtain the best possible surround sound effect. Note • Before you start, ensure that you have made all the required connections. • Complete the Ambisound setup for this unit before you insert a disc to play. 1 Press DISC to switch to disc mode 2 Turn on the TV and switch it to the correct video-in channel. A welcome message is displayed. Welcome The next few steps will help you set up your Home Theater System to match your listening environment. To optimize the Ambisound surround effect for your home, please begin with this simple setup. Stop: Exit Continue • To skip the Ambisound setup, press x to exit. 3 Press B to continue. A message on the unit orientation is displayed. 20 EN