Philips HTS8140 User Manual - Page 23
Activate EasyLink control - user manual
View all Philips HTS8140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
English Get started 6 Select [ Progressive ] > [ On ], then press OK. A warning message is displayed. 7 To proceed, select [ OK ] in the menu and press OK. The progressive setup is complete. Note • If a blank/distorted screen is displayed, wait for 15 seconds for the auto recover. • If no picture displayed, turn off the progressive scan mode as follows: 1) Press Z to open the disc compartment. 2) Press B. 3) Press SUBTITLE. 8 To exit the menu, press OPTIONS. 9 You can now turn on the progressive scan mode on your TV (see the TV user manual). Note • There are some progressive scan TVs that are not fully compatible with this unit, resulting in an unnatural picture when playing back a DVD VIDEO disc in the progressive scan mode. In such case, turn off the progressive scan feature on this unit and your TV. Activate EasyLink control This feature is only applicable if this unit is connected to HDMI CEC compliant TV/device. It enables all the linked devices response or react to certain commands simultaneously with one touch control. 1 Turn on the HDMI CEC operations on your TV and other connected devices. See TVs/devices manual for details. 2 You can now enjoy the EasyLink controls. One touch play [ Auto Wake-up TV ] When you press PLAY button, this unit will wake- up from standby mode and start disc play (if a video disc is found in the disc compartment) and it will also turn on your TV and switch to the correct viewing channel. One touch power off [ System Standby ] When you press and hold STANDBY button, it will turn off this unit and all the linked devices to standby. This unit also responses to standby command from other HDMI CEC devices. One touch audio input switching [ System Audio Control ] This unit is able to render the audio signals from the active source. It switches automatically to the corresponding audio input and output the sound from its speakers system. • Before you can enjoy this function, you have to map the audio inputs to the connected devices. • You can use any HDMI CEC TV/device remote control to adjust the volume. EN 23