Philips ID9371B User manual - Page 41
Registration, To register an additional handset, Select Base, To manually select best base station
![]() |
UPC - 609585127869
View all Philips ID9371B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Advanced Settings EN 3. Scroll : to Number and press mSELECT. 4. The last stored Baby Call number is displayed (if any). 5. Enter the new Baby Call number and press mOK to confirm. A validation tone is emitted and the screen returns to previous menu. Registration The procedures described below are the procedures that you will find in your ID937 handset. The procedures may vary according to the handset you want to register. In this case, please refer to the manufacturer of the additional handset. Additional handsets must be registered to the base unit before you can use them. Up to 6 handsets can be registered to one base station. The Master PIN is required before you can register or unregister handsets. The default PIN is 0000. To register an additional handset 1. On the base station, press and hold p for 3 seconds. After that, the registration procedure has to be done within 1 minute. Within 1 minute, the base station is able to accept registration from a handset. If there is no action taken on the handset within 10 seconds, the registration procedure will be aborted. 2. At the same time, on the handset, press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Registration and press mSELECT. 3. Press : to select the Base to be registered to and press mOK to confirm. 4. Enter the Master PIN when prompted and press mOK to start registration. If the PIN is incorrect, Incorrect PIN will be displayed and the handset returns to stand-by mode. A validation tone is emitted to indicate successful registration and the screen returns to stand-by mode. Select Base One ID937 handset can be registered to up to 4 different ID937 Base stations. By default, the handset will register to BASE 1. If you select Best Base, the handset will register to the nearest base station. To manually select best base station 1. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Select Base and press mSELECT. 2. Scroll : to the desired base station and press mOK to confirm. 3. The handset will start searching for the base station. If the selected base is found, a validation tone is emitted. 41
![](/manual_guide/products/phillips-id9371b-user-manual-f79ce50/41.png)