Philips L3/93 User manual - Page 6
Get started
View all Philips L3/93 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
3 Get started Charge the battery Note Before you use your headset for the rst time, charge the battery for 2 hours for optimum battery capacity and lifetime. Use only the original USB charging cable to avoid any damage. Finish your call before charging the headset, as connecting the headset for charging will power the headset o . Connect the supplied USB charging cable to: • The USB type C charging slot on the headphones and; • The charger/USB port of a computer. LED turns white during charging and turns o when the headphones in fully charged. Tip Normally, a full charge takes 2 hours. Pair the headphones with your mobile phone Before you use the headphones with your mobile phone for the rst time, pair it with a mobile phone. A successful pairing establishes a unique encrypted link between the headphones and mobile phone. The headphones store the last 8 devices in the memory. If you try to pair more than 8 devices, the earliest paired device is replaced by the new one. Make sure that the headphones are fully charged and turned o . Press and hold for 5 seconds until the blue and white LED ashes alternately. The headphone remain in pairing mode for 3 minutes. Make sure that the mobile phone is turned on and its Bluetooth feature is activated. Pair the headphones with the mobile phone. For detailed information, refer to the user manual of your mobile phone. The following example shows you how to pair the headphones with your mobile phone. Activate the Bluetooth feature of your mobile phone, select Philips Fidelio L3 Philips Fidelio L3