Philips MCD908 User manual - Page 13

English Using Component Video jacks (Y Pb Pr) IMPORTANT! - The progressive scan video quality is only possible when usingY Pb Pr, and a progressive scan TV is required. Connections Using S-Video jack IMPORTANT! - If S-Video is used for DVD playback connection, the system's VIDEO OUT setting will need to be changed accordingly. 1 Use component video cables (red/blue/green - not supplied) to connect the DVD system's COMPONENT (Pr/Cr Pb/Cb Y) jacks to the corresponding Component video input jacks (or labeled as Y Pb/Cb Pr/Cr or YUV) on the TV. 2 To hear the TV channels through this DVD system, use the audio connectors (white/ red) of the supplied audio and composite video cables (2-in1) to connect AUX IN L/R jacks to the corresponding AUDIO OUT jacks on the TV. 3 If you are using a Progressive Scan TV (TV must indicate Progressive Scan or ProScan capability), to activate TV Progressive Scan, please refer to your TV user manual. For DVD system Progressive Scan function, see "Getting StartedSetting up Progressive Scan feature". 1 Use an S-Video cable (not supplied) to connect the DVD system's S-VIDEO jack to the SVideo input jack (or labeled as Y/C or S-VHS) on the TV. 2 To hear the TV channels through this DVD system, use the audio connectors (white/ red) of the supplied audio and composite video cables (2-in1) to connect AUX IN L/R jacks to the corresponding AUDIO OUT jacks on the TV. Note: - If your TV does not support Progressive Scan, you will not be able to view the picture. Press SYSTEM on the remote to exit the system menu and then DISC and "1" to exit progressive scan. 13