Philips MX5900SA User manual - Page 35

Setting the analog output Set Analog Output to match your DVD home cinema system's playback capability. This function can also be accessed via the SURR. button on the remote control (or SURROUND on the front panel.) Follow the steps of "Using the Setup Menu" and select : > Analog Output 1en 1en Digital output Analog output Night mode Karaoke vocal Speaker layout Speakers PCM output 1 st Stereo 3D sound Multi-channel Stereo Select this to change channel output to stereo which delivers sound from only the two front speakers and subwoofer. 3D Sound Select this to change channel output to 3D sound which delivers surround sound from only the two front speakers and subwoofer. Multi-channel Select this to enable Multi-channel output. DVD Menu Options Night mode - turning on/ off Follow the steps of "Using the Setup Menu" and select : > Night Mode 1en 1en 1 st Digital output Analog output Night mode On Karaoke vocal Off Speaker layout Speakers PCM output Off Select this when you want to enjoy the surround sound with its full dynamic range. On Select this to level out the volume. High volume outputs will be softened and low volume outputs are brought upward to an audible level. This feature is only available for movies with Dolby Digital mode. Karaoke vocal - turning on/ off Follow the steps of "Using the Setup Menu" and select : > Karaoke vocal 1en 1en 1 st Digital output Analog output Night mode Karaoke vocal On Speaker layout Off Speakers PCM output Off Select this to turn off karaoke vocal function. On Select this when a multi-channel karaoke DVD is being played. The karaoke channels on the disc will then be mixed into a normal stereo sound; allowing you to hear both the lyrics and music together. 35 English