Philips PSA232 User manual - Page 31

Device Restore / Repair Your device is controlled by an internal program called firmware. In case your device has a problem, or you wish to format the device, you may need to restore / repair it. ✔ TIP Please insert a new battery before device restore/repair. This will ensure steady power supply for completing the whole process. 1 Connect your device to your computer. Launch Device Manager from Start ➔ Program ➔ Philips Device Manager. 2 Launch Device Manager User Interface by right-clicking on this taskbar and selecting "Launch Device Manager" or by going to Start ➔ Programs ➔ Philips Device Manager icon in the 3 In the main window, go to the repair tab and click Repair. 4 You will be prompted before repair begins. ATTENTION! All media contents will be erased! 5 Click OK to continue. Click Cancel to stop. 6 The Device Manager will repair your device. Once the repair is complete, the device can be used again. Your device will be automatically disconnected as soon as Device Manager finishes interacting with your device and will get connected back to the PC after the repair is complete. 11