Philips SE6580B User manual - Page 17

01GB04C02.fm Page 15 Thursday, November 20, 2008 1:50 PM inform you that the battery is low. If the battery level becomes exceedingly low, the phone automatically switches off shortly after the icon starts blinking and any function in progress will not be saved. 1 Place the handset in the cradle of the charger with the display facing forward. A beep is emitted if the handset is placed correctly. 2 The battery icon on the display blinks during charging. 3 The battery icon becomes steady when the handset is fully charged. Note Optimal battery life is reached after 3 cycles of complete charging (over 15 hours) and discharging, allowing approximately 12 hours of talk-time and 150 hours of stand-by time. The indoor and outdoor ranges of the handset are up to 50 meters and 300 meters, respectively. When the handset moves beyond the operation range, the antenna icon will blink. Tip When you reach the range limit the conversation may become crackly. Move closer to the base. 2 To attach the belt clip to your handset, fit the tabs on the belt clip into the slots at the back of the handset and push into place. 5.5 Install optional headset Your handset may be used with an optional headset (not included in the box). To use this feature, insert the headset plug into the headset jack. Your handset is ready for hands-free conversations. Diameter: 2.5 mm 6 Registration 5.4 Remove/Attach belt clip A belt clip allows you to carry your handset on your belt. 1 To remove the belt clip, simply pull the clip away from the handset. 6.1 Registering the handset You must register your handset to the base station before you can use it. Up to 8 handsets can be registered to one base station. The PIN is required before you can register or unregister handsets. By default, the PIN is 0000. Registration 15