Philips SL50I User manual - Page 17
Problem solving, 1 SL50i problems, Problem, Possible cause, Solution - sl400i
View all Philips SL50I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
ENGLISH 17 Problem Power light does not light up. No sound from the audio system. No music or in poor quality only. The remote control does not function properly. There is no Ethernet connection on your SL50i rear panel. The PMM (Philips Media Manager) shows the options 'Photos and 'Movies'. The SL50i does not respond to any of the buttons, including the standby button. The SL50i switches to standby with the Power LED flashing on and off. Not all remote control buttons can be used for operating your SL50i. Chapter 6 - Problem solving 6.1 SL50i problems Check the Support section on www.philips.com/streamium for the latest information on problem solving. Possible cause Solution No connection to power supply. Connect the power adapter to the SL50i and to a mains outlet that provides electrical power. Audio system is switched off. Switch on your audio system. Volume too low. Increase volume or switch off mute of your audio set. Wrong cable connections. Check your cable connections; see chapter 2 'Installing your SL50i' (page 10-11). Wrong audio input. On your audio system, select the audio input you connected the SL50i to. Incompatible codec (media format). Comply with the supported codecs. Go to www.philips.com/streamium to see which codecs are currently supported. Correct codec, but still low quality audio. Most PC media formats use heavy data compression techniques that lower the audio quality, e.g. compared to CD. Lower quality display is normal. Firewall software blocks streaming. Disable firewall software to test whether it interferes with streaming audio. Go to www.philips.com/streamium to see what ports you need to open for streaming (49153 and 49154 TCP and UDP) Digital recording may be copy protected. SL50i is not allowed to ignore copy protection. Out of range. Move closer to the SL50i and point the remote control directly at the IR sensor on the front of the SL50i. Batteries low. Replace the batteries. Your SL50i is only equipped with a A wireless (computer) network is required for built-in wireless network connection. operating your SL50i. PMM has these options for Philips Wireless Multimedia Links. To enjoy our full range of wireless possibilities, you will need an SL300i or SL400i Wireless Multimedia Link that gives you access to photos and movies. Internal error. Unplug it from the outlet and wait at least 10 seconds before reconnecting it. Your SL50i has a thermal shutdown that shuts down the set when the internal temperature exceeds a certain threshold. Disconnect from the power supply, , let the set cool down, improve ventilation, and reconnect the set to the power supply. (If the problem persists, return the set to your dealer.) The buttons you pressed have no function in the current menu. Functionality of the remote control buttons depends on the menu the buttons are used in.