Philips SRU4010 User manual - Page 2
Battery Installation, Battery Saver, Code Saver, Code Setup - 10 codes
View all Philips SRU4010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Table of Contents Setup Introduction 2 Setup 3 Battery Installation 3 Battery Saver 3 Code Saver 3 Code Setup 3 Button Functions 4 Code Entry 5 Direct Code Entry 5 Code Search 6 Code Identification Feature 7 Sleep Timer 8 Product Operation 9 Code List 10 Troubleshooting 13 Introduction Congratulations on your purchase of a Philips Universal TV Remote Control. Philips Universal Remotes let you replace a broken or lost remote or combine more than one remote into one. This remote control operates the common features of most but not all models and brands of IR Infrared Controlled TVs. This remote may provide functions that are not available on your TV. Some functions of your particular TV (e.g. menu functions) may not be controlled by this remote. In such cases, use the original remote control for your equipment. Please use this manual to become familiar with your Philips Universal TV Remote. After you are familiar with your remote the first thing you need to do is to install batteries and setup your remote for your particular TV brand. Thank you for buying a Philips remote and we hope it will give you many years of service. Battery Installation 1. On the back of the remote, push down on the tab and lift the cover off. 2. Match the batteries to the + and - marks inside the battery case, then insert 2 AAA Alkaline batteries. 3. Press the battery cover back into place. Battery Saver Your remote automatically turns off if the buttons are depressed more than 30 seconds. This will save your batteries should your remote get stuck in a place where the buttons remain depressed (e.g., between the sofa cushions). Code Saver You will have up to 10 minutes to change the batteries in your remote without losing codes you have programmed. However, do not press any buttons until batteries are installed in the remote. If buttons are pressed without batteries in the remote, all codes will be lost. Code Setup The CODE SEARCH button is used to setup the remote. You can either setup the remote using the code for your brand of product, from the code tables, or you can search through the library of codes until you find a code that works for your product. CODE SEARCH 2 3