Philips TAT6908BK User manual - Page 9

3 Turn on the Bluetooth function of your Bluetooth device. 4 Pair the earpieces with your Bluetooth device, refer to the user manual of your Bluetooth device. Note  After powering on, if the earpieces cannot �nd any previously connected Bluetooth device, please put them into pairing mode (press button on box for 3 seconds with both earpieces inside and the cover open). The following example shows you how to pair the earpieces with your Bluetooth device. 1 Turn on the Bluetooth function of your Bluetooth device, select Philips TAT6908. 2 Enter the earpieces' password "0000" (4 zeros) if prompted. For those devices featuring Bluetooth 3.0 or higher, there is no need to enter a password. Philips TAT6908 Single earpiece (Mono mode) Take either right or left earpiece out from charging box for Mono use. The earpiece will power on automatically. Note  Take the second earpiece from the charging box and they will pair with each other automatically. 8 EN Pair the earpieces with another Bluetooth device If you want to pair another Bluetooth device with the earpieces, just put them into pairing mode, (press button on box for 3 seconds with both earpieces inside and the cover open), then discover the second device as per normal pairing. 03" Note  The earpieces store 4 devices in the memory. If you try to pair more than 4 devices, the earliest paired device is replaced by the new one. Multi-point connection Pairing • Pairing the headphones to 2 devices, e.g. mobile phone and notebook. Switch between device • At anytime, you can only listen to music from 1 device. Another device will be for phone call. • Pause the audio from 1 device and then start play audio from the another device. Note  When streaming audio from Device 1, receiving a call from Device 2 will automatically pause Device 1 playback. And the call will be routed automatically to headphones.  Ending the call will automatically resume playback from device 1.