Philips VOIP3211G User manual - Page 13

Connect US Note : Install the drivers and software first (see page 11) and connect the USB phone only once it is done. 1. Connect the output plug of the base adapter to the adapter socket on the back of the base unit and the base adapter to the wall main supply. A click should be heard when the cord is properly connected to the base. 2. Connect the USB plug directly to your PC's USB slot. 3. Connect the telephone line cord to the phone socket on the back of the base unit and to the plug (optional and country dependent) then to the wall phone socket. Note : You may find in the box the line adaptor delivered separately from the line cord. In this case, please, first plug this line adaptor onto the line cord before connecting it to the line socket. 4. Each handset comes with a charger and an adapter. Connect the adapter to the wall main supply. 5. Place the 2 rechargeable NiMH AAA batteries (included), observing their polarities, into the battery compartment on the handset. 6. Slide the battery door firmly into place. 7. Place the handset on the charger and let the batteries continuously charge for 24 hours before using. The handset may get warm during the initial charge. This is normal. 8. Please note that handset may not turn ON for up to 15 minutes if the batteries are too low. Note : Before first use, put the product on the charger and charge batteries for 24 hours minimum. 13