Philips VOIP8551B User manual - Page 54
Activate DHCP, Settings, Network, TCP/IP, Select, Activate PPPoE, PPPoE, Enter, Static IP,
![]() |
View all Philips VOIP8551B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
16.6.2.1 Activate DHCP 1 Press Menu. 2 Select Settings > Network > TCP/IP. Press Select. 3 Select DHCP. Press OK. • An activation request is displayed. 4 Press OK to confirm. • Your IP address is displayed. The new setting is saved. 16.6.3 PPPoE If your Internet service provider requires you to use PPPoE, you can configure your user name and password for the PPPoE connection. 16.6.3.1 Activate PPPoE 1 Press Menu. 2 Select Settings > Network > PPPoE. Press Yes. 3 Enter username. Press OK. 4 Enter password. Press Enter. • An activation request is displayed. 5 Press OK to confirm. • The new setting is saved. 16.6.5 Configure individual network settings After configuring to use your own static IP, you can also make changes to other settings in the network such as subnet mask, gateway address, DNS, etc. 1 Press Menu. 2 Select Settings > Network > TCP/IP. Press Select. 3 Select the item you want to change. Press Select. 4 Edit the information. Press OK. • The setting is saved. 16.6.6 Reset the Network 1 Press Menu. 2 Select Settings > Network > Reset network. Press Select. • A confirmation request is displayed. 3 Press Yes to confirm. • The network setting is reset. 16.6.4 Configure a static IP You can configure the network to use your own static IP. 1 Press Menu. 2 Select Settings > Network > TCP/IP. Press Select. 3 Select Static IP. Press Select. • A confirmation request is displayed. 4 Press Yes to confirm. 5 Follow the on-screen instruction to finish configuring your network. The System 51
![](/manual_guide/products/phillips-voip8551b-user-manual-813ff05/54.png)