Philips WAS5 User manual - Page 22
Reset - 22 user manual
View all Philips WAS5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
English Reset Reset If desired, you can restore your Center or Station to their default setting (including the network setting). When to reset Center or Station: ● Resetting Center or Station helps to re-establish the connection between Center and Station. ● To change the way your Center connects to PC, you need to reset the Center (see the Option 1, Option 2 or Option 3 in manual Connect to your PC) 1 Check the set is switched on (See Basic functions) 2 Press and hold STOP • MENU to enter the MENU screen (or on the remote control, press MENU) 3 Use the navigation controls 3 or 4 and 2 to enter Settings 4 Use the navigation controls 3 or 4 and 2 to enter Restore settings 5 Press 3 or 4 and 2 to select Yes ➜ The set is rebooted. Language selection screen appears 6 Select your desired language: English, Français, Español, Nederlands, Italiano and Deutsch ➜ The set enters Installation Mode ➜ The search for Center or Stations starts.The Wi-Fi connection is being re-established If a Station is reset and the Center is not: ● On the Center, select HD mode and then, enter Installation Mode by: a. Press MENU b. Use the navigation controls 3 or 4 and 2 to enter Station Mgnt menu c. In Station Mgnt menu, use the navigation controls 3 or 4 and 2 to select Add New Station ➜ Searching for Stations starts If both Center and Stations are reset: ● Do as you did in the first-time Wi-Fi connection (see the user manual for WACS57 or WACS5: Installation, Set up Wi-Fi connection between Center and Station) 7 On Center, press STOPÇto exit Installation Mode when all your Stations are found If the Center is reset and Stations are not reset: ● On the Stations, enter Installation Mode by: a. Remove the Station's power plug and then, connect it to the power supply again ➜ "Connecting to Center" appears b. Press MENU or STOP to enter the selection screen of Installation Mode and Select Server c. Use the navigation controls 3 or 4 and 2 to select Installation Mode 22