Pioneer AVH P4100DVD Owner's Manual - Page 84
Adjusting source levels, Using the dynamic range control, Using the down-mix function, Using - aux input
UPC - 012562911298
View all Pioneer AVH P4100DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Section 19 Available accessories Adjusting source levels SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. ! Settings are based on the FM volume level, which remains unchanged. 1 Compare the FM volume level with the level of the source you wish to adjust. 2 Touch Source Level Adjuster on the DSP function menu. 3 Touch c or d to adjust the source volume. Each time you touch c or d it increases or decreases the source volume. +4 to -4 is displayed as the source volume is increased or decreased. Notes ! The AM volume level can also be adjusted with source level adjustments. ! Video CD, CD, compressed audio and DivX are set to the same source level adjustment volume automatically. ! External unit 1 and external unit 2 are set to the same source level adjustment volume automatically. ! AUX (auxiliary input) and AV (AV input) are set to the same source level adjustment volume automatically. Using the dynamic range control The dynamic range refers to the difference between the largest and softest sounds. The dynamic range control compresses this difference so that you can clearly hear sounds even at low volume levels. ! The dynamic range control is effective only on Dolby Digital sounds. ! When playing other than the DVD disc, you cannot switch to Dynamic Range Control. 1 Touch Dynamic Range Control on the DSP function menu. 2 Touch d to turn the dynamic range control on. # To turn dynamic range control off, touch c. Using the down-mix function The down-mix function allows you to play back multi-channel audio in 2 channels. 1 Touch Down Mix on the DSP function menu. 2 Touch c or d to select the desired level. ! Lo/Ro - Stereo mix the original audio that do not contain channel modes such as surround components. ! Lt/Rt - Down mix so that the surround components can be restored (decoded). Using the direct control You can override audio settings to check for effectiveness of your audio settings. ! All audio functions are locked out when the direct control is on except VOLUME and Dolby Pro Logic II. 1 Touch Digital Direct on the DSP function menu. 2 Touch d to turn the direct control on. # To turn direct control off, touch c. Using the Dolby Pro Logic II Dolby Pro Logic II creates five full-bandwidth output channels from two-channel sources to achieve high-purity matrix surround. ! Dolby Pro Logic II supports up to 48 kHz sampling rate stereo source and has no effect on other types of source. ! When both the center speaker and the rear speaker are set to OFF in the speaker setting, you cannot switch to Dolby Pro Logic II. 84 En