Pioneer AVH-P7500DVD Owner's Manual - Page 46

Section 08 Playing Video CDs Introduction of advanced Video CD operation 1 1 Function display Shows the function names. % Touch A.MENU and then touch FUNCTION to display the function names. The function names are displayed and operable ones are highlighted. # When A.MENU is not displayed, you can display it by touching the screen. # You can also display MENU by clicking the joystick. # To go to the next group of function names, touch NEXT. # To return to the previous group of function names, touch PREV. # To return to the previous display, touch BACK. # To return to the playback display, touch ESC. Notes ! The dynamic range control is effective only on Dolby Digital sounds. (Refer to page 43.) ! If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display. Repeating play There are two repeat play ranges for the Video CD playback: TRACK (track repeat) and DISC (disc repeat). ! During PBC playback of Video CDs, this function cannot be operated. 1 Touch A.MENU and FUNCTION and then touch REPEAT. 2 Touch either of the following touch panel keys to select the repeat range. ! DISC  Repeat the current disc ! TRACK  Repeat just the current track Note If you perform track search or fast forward/reverse, the repeat play range changes to DISC. Pausing Video CD playback Pause lets you temporarily stop disc playback. % Touch f during playback. The icon e is displayed for four seconds and playback is paused letting you view a still image. # To resume playback at the same point that you turned pause on, touch f again. Notes ! You can also turn on or off pause function using PAUSE. To display PAUSE, touch A.MENU and then touch FUNCTION. ! Depending on the disc and the playback location on the disc, the icon may be displayed indicating that still playback is not possible. 46 En