Pioneer AVH-X7800BT Owner s Manual - Page 49
Other functions, Connection - wiring
View all Pioneer AVH-X7800BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Other functions Connection Restoring this product to the default settings You can restore settings or recorded content to the default settings. Various methods are used to clear user data. Method 1: Remove the vehicle battery Resets various settings registered to this product. p The settings configured on the "Theme" screen are not reset. Method 2: Restore the default settings from the "System" menu Method 3: Press the RESET button Refer to Resetting the microprocessor on page 6 Restoring the default settings p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. CAUTION Do not turn off the engine while restoring the settings. 1 Display the "System" setting screen. 2 Touch [Restore Settings]. A message confirming whether to initialize the settings appears. 3 Touch [Restore]. p The source is turned off and the Bluetooth connection is disconnected before the process starts. Precautions Your new product and this manual Do not operate this product, any applications, or the rear view camera option (if purchased) if doing so will divert your attention in any way from the safe operation of your vehicle. Always observe safe driving rules and follow all existing traffic regulations. If you experience difficulty in operating this product or reading the display, park your vehicle in a safe location and apply the parking brake before making the necessary adjustments. Do not install this product where it may (i) obstruct the driver's vision, (ii) impair the performance of any of the vehicle's operating systems of safety features, including airbags, hazard lamp buttons, or (iii) impair the driver's ability to safely operate the vehicle. In some cases, it may not be possible to install this product because of the vehicle type or the shape of the vehicle interior. Important safeguards WARNING Pioneer does not recommend that you install this product yourself. This product is designed for professional installation only. We recommend that only authorized Pioneer service personnel, who have special training and experience in mobile electronics, set up and install this product. NEVER SERVICE THIS PRODUCT YOURSELF. Installing or servicing this product and its connecting cables may expose you to the risk of electric shock or other hazards, and can cause damage to this product that is not covered by warranty. Precautions before connecting the system WARNING Do not take any steps to tamper with or disable the parking brake interlock system which is in place for your protection. Tampering with or disabling the parking brake interlock system could result in serious injury or death. CAUTION Secure all wiring with cable clamps or electrical tape. Do not allow any bare wiring to remain exposed. Do not directly connect the yellow lead of this product to the vehicle battery. If the lead is directly connected to the battery, engine vibration may eventually cause the insulation to fail at the point where the wire passes from the passenger compartment into the engine compartment. If the yellow lead's insulation tears as a result of contact with metal parts, shortcircuiting can occur, resulting in considerable danger. It is extremely dangerous to allow cables to become wound around the steering column or shift lever. Be sure to install this product, its cables, and wiring away in such so that they will not obstruct or hinder driving. Make sure that the cables and wires will not interfere with or become caught in any of the vehicle's moving parts, especially the steering wheel, shift lever, parking brake, sliding seat tracks, doors, or any of the vehicle's controls. Do not route wires where they will be exposed to high temperatures. If the insulation heats up, wires may become damaged, resulting in a short circuit or malfunction and permanent damage to the product. Do not shorten any leads. If you do, the protection circuit (fuse holder, fuse resistor or filter, etc.) may fail to work properly. Never feed power to other electronic products by cutting the insulation of the power supply lead of this product and tapping into the lead. The current capacity of the lead will be exceeded, causing overheating. Before installing this product Use this unit with a 12-volt battery and negative grounding only. Failure to do so may result in a fire or malfunction. To avoid shorts in the electrical system, be sure to disconnect the (-) battery cable before installation. To prevent damage WARNING Use speakers over 50 W (maximum input power) and between 4 Ω to 8 Ω (impedance value). Do not use 1 Ω to 3 Ω speakers for this unit. 49