Pioneer AVHP5000DVD Owner's Manual - Page 42

Section 03 Operating this unit # When the rear output setting is S.W, you cannot operate the following procedure. 3 Touch c or d next to PREOUT to switch the subwoofer output or rear output. Touching c or d will switch between S.W and REAR and that status will be displayed. Notes ! Even if you change this setting, there is no output unless you turn the subwoofer output on (refer to Using subwoofer output on page 36). ! If you change this setting, subwoofer output in the audio menu return to the factory settings. ! Both rear speaker lead outputs and RCA rear output are switched simultaneously in this setting. Changing languages for CAUTION Some operations on this unit are prohibited while driving or needs to be paid a careful attention when operating. In such case, a caution appears on the display. You can change the language of the cautions at this setting. % Touch CAUTION LANGUAGE on the initial menu to select your desired language. Each time you touch CAUTION LANGUAGE it selects languages for CAUTION in the following order: ENGLISH-ESPAÑOL-FRANÇAIS Switching the sound muting/ attenuation Sound from this system is muted or attenuated automatically when the signal from the equipment with mute function is received. ! Sound from this system returns to normal when the muting or attenuation is canceled. % Touch TEL to select any of the muting, attenuation or off. Touch TEL until the desired setting appears in the display. ! MUTE - Muting ! ATT -20dB - Attenuation (ATT -20dB has a stronger effect than ATT -10dB) ! ATT -10dB - Attenuation ! OFF - Turn the sound muting/attenuation off Notes ! The sound is turned off, MUTE is displayed and no audio adjustments are possible. ! The sound is attenuated, ATT is displayed and no audio adjustments, except volume control, are possible. ! Operation returns to normal when the phone connection is ended. Switching the warning tone If the front panel is not detached from the head unit within four seconds of turning off the ignition, a warning tone sounds. You can turn off the warning tone. 1 Touch NEXT on the initial menu. 2 Touch DT.WARNING to turn warning tone on. # To turn warning tone off, touch DT.WARNING again. Entering PIN code for Bluetooth wireless connection To connect your cellular phone to this unit via Bluetooth wireless technology, you need to enter PIN code on your phone to verify the connection. The default code is 0000, but you can change this in this function. ! With some Bluetooth audio players, you may be required to enter the Bluetooth audio player PIN code in advance to set this unit for a connection. 42 En