Pioneer AVIC-88DVD Installation Manual - Page 9

Chapter 1 How to Use Remote Control and Names of Parts Chapter 1 How to Use Remote Control and Names of Parts Preparing the Remote Control Some navigation operations can be performed with the Steering Remote Control provided. Prior to using the remote control, refer to the following to install the battery. Inserting the battery for the Remote Control The CR2032 (3V) lithium battery is used with the remote control. Steering Remote When using the remote control for the first time: Pull out the film in between the cover and the remote contol. • Do not recharge, disassemble, heat or dispose of the battery in fire. • Use a CR2032 (3V) lithium battery only. Never use other types of battery with this unit. • Do not handle the battery with metallic tools. • Do not store the lithium battery with metallic materials. • When disposing of used batteries, please comply with governmental regulations or environmental public institution's rules that apply in your country/area. • Always check carefully that you are loading the battery with its (+) and (-) poles facing in the proper directions. • Remove the battery if remote control is not to be used for a month or longer. • In the event of battery leakage, wipe the remote control completely clean and install a new battery. When replacing the battery with a new one: Remove the cover on the back of the remote control and insert the lithium battery with the positive side (+) up. When changing the battery, use a probe with a fine non-metallic tip to remove the lithium battery. • Keep the lithium battery out of reach of children. Should the battery be swallowed, immediately consult a doctor. 7