Pioneer BDP-05FD Owner's Manual - Page 53

Problem 192 kHz or 96 kHz digital audio signals cannot be output from the DIGITAL OUT (COAXIAL/OPTICAL) terminals. Check Remedy 07 It is not possible to output 192 kHz or 96 kHz digital audio signals from this player's DIGITAL OUT (COAXIAL/OPTICAL) terminals. The signals are automatically converted to under 96 kHz for output. Secondary audio or interactive audio is not output. Is HDMI Audio Out properly set? Are Dolby Digital Out and DTS Out properly set? Set HDMI Audio Out to PCM (page 41). Set Dolby Digital Out to Dolby Digital 1, DTS Out to DTS 1 (page 40). Sound is fast or slow. When an HDMI cable is connected, are audio signals being output from devices connected with cables other than HDMI cables? When this player is connected by HDMI cable to a Pioneer AV receiver or amplifier compatible with the PQLS function via HDMI connection, the PQLS function is activated when playing a music CD (CD-DA). Because of this, the sound output from components other than the ones connected by HDMI cable may be fast or slow. If this happens, set PQLS to Off (page 41). Files recorded on discs cannot be played. Is the disc one that is playable on this player? Check whether the disc is one that can be played on this player (page 8). Is the file one that is playable on this player? • Check whether the file is one that can be played on this player (page 10). • Check whether or not the file is damaged Is the file protected by DRM? Files protected by DRM cannot be played. A message indicating low memory (local storage) appears while playing a BDROM disc. Erase the BDMV data (page 24). When connected using an HDMI cable Problem HDMI indicator does not light. No picture is displayed. Pictures do not display properly on the TV. No sound is produced. Check Is the input of the connected HDMI device properly set? Is a DVI device connected? Is the HDMI indicator lit? Are the terminals for outputting video signals properly set? Is the resolution properly set? Is the HDMI cable properly connected? Is a DVI device connected? Is the HDMI cable damaged? Remedy Read the HDMI device's operating instructions and set the input properly. Read the DVI device's operating instructions and check whether it is compatible with HDCP. • If the HDMI indicator is not lit, read the HDMI device's operating instructions and switch to the proper input. • If the HDMI indicator is lit, use OUTPUT RESOLUTION to switch the output video resolution (page 25). Press VIDEO SELECT to switch the HDMI OUT terminal. Depending on the output video resolution setting, the picture may not be output. Use OUTPUT RESOLUTION to switch the output video resolution (page 25). • Insert the cable firmly and all the way in. • With some cables, 1080p video signals cannot be properly output. The picture may not be displayed properly if a DVI device is connected. If the cable is damaged, replace it with a new one. Change the HDMI Color Space setting (page 41). Is a DVI device connected? The sound will not be output from the HDMI OUT terminal if a DVI device is connected. Connect the device to a DIGITAL OUT (OPTICAL/COAXIAL) terminal or the AUDIO OUT (2 ch) terminals. 53 En