Pioneer CDJ-400 CDJ-400 Operating Instructions - Page 10

BEFORE OPERATING (CONNECTIONS) 3. Connecting to other devices A Connecting to a stereo amplifier (when not using a DJ mixer) Connect to the CD or AUX input connectors Stereo amplifier (Do not use the PHONO input connectors.) Supplied audio cable B Connecting to a component with digital input connectors CD recorder or amplifier with digital inputs Digital signal cable CDJ-400 CDJ-400 ÷ The DIGITAL OUT connectors produce audio data only (without subcodes; CD graphics are not supported). ÷ Depending on the CD recorder or other component connected, some recording or other functions may be limited. For details, consult the operating instructions for the connected component. C Connecting to a Computer USB cable Connect to USB port. CDJ-400 Computer ÷ Supported computer operating systems include Windows Vista, Windows XP, Windows 2000, and Mac OS 10.3 or later. ÷ When used with Windows 2000, a special MIDI driver must be installed before performing connections. ÷ A special ASIO driver is also available to allow audio signals to be output from computer. ÷ Please visit the following website to download special drivers, and for more information about the Pioneer DJ software program "DJS." http://www.prodjnet.com/support/ 4. Connecting the power cord After all other connections have been made, connect the power cord to the AC inlet on the rear panel of the player and connect the power plug to an AC wall outlet or to a power receptacle on the rear panel of the amplifier. 10