Pioneer CDJ-400 Driver Installation Guide to operate CDJ-400(s) through the Pi - Page 4

• If the [Digital Signature Not Found] message appears during installation, click on the [Yes] button to continue the installation process. • During installation, if the computer displays the message [What do you want the wizard to do?] select [Install the software automatically (Recommended)], then click the [Next] button to continue installation. 5 When installation is completed, the [Installation is now complete.] message will appear. Click on the [Finish] button to complete the process. [3] Connect CDJ-400 to computer Using the USB cable, connect the CDJ-400 to your computer, then set the CDJ-400's power switch to ON. When the CDJ-400 is first connected to a computer or when the computer's USB port is reconnected, the message [Installing device driver software] may appear on the computer monitor. In this case, simply wait until the message [Your devices are ready for use] is displayed. • During the installation process, if the computer displays the message [Can Windows connect to Windows Update to search for software?] select [No, not this time], then click on the [Next] button to continue the installation process. • If the [Hardware Installation] message appears during installation, click on [Continue Anyway] to continue the installation process. • If the [Digital Signature Not Found] message appears during installation, click on the [Yes] button to continue the installation process. 4 En