Pioneer CDJ-400 Driver Installation Guide to operate CDJ-400(s) through the Pi - Page 5

[4] Setting the buffer size The CDJ-400 is equipped with functions as an audio device compliant with ASIO (Audio Stream Input Output) specifications. To adjust the buffer size of the device, click on the Windows [START] menu button, then [View All Programs]  [Pioneer]  [CDJ-400]  [CDJ-400 ASIO Settings Utility]. * Setting the buffer size to a higher value will help prevent audio dropouts (interrupted sound), but the resulting audio data latency may result in increased time lags. * If a program (DJ software, etc.) that uses the CDJ-400 as its designated audio device is currently running, close the program, then adjust the buffer size. [5] To confirm driver version To confirm the verson of the installed driver, click on Windows [START] button, followed by [View All Programs]  [Pioneer]  [CDJ-400]  [CDJ-400 Version Display Utility]. * This screen also allows you to confirm the version of the firmware currently installed. Note, however, that the firmware version will not be displayed if the CDJ-400 is not connected to a computer, or if the computer is not communicating properly with the CDJ-400. * Up-to-date information regarding CDJ-400 driver software can be found at the following website: http://www.prodjnet.com/support © 2008 PIONEER CORPORATION. All rights reserved. • Pioneer is a registered trademark of Pioneer Corporation • Microsoft and Windows are registered trademarks of Microsoft Corporation, registered in the U.S. and other countries. Windows' official name is "Microsoft Windows Operating System." • ASIO is a registered trademark of Steinberg Media Technologies GmbH. • All other brand, product and company names are the trademarks or registered trademarks of their respective owners. 5 En