Pioneer DEH-2500UI Owner's Manual - Page 16

Appendix Additional information Additional information Troubleshooting Symptom Cause Action The display automatically returns to the ordinary display. You did not perform any operation within about 30 seconds. Perform operation again. The repeat play range changes unexpectedly. Depending on Select the repeat the repeat play play range again. range, the selected range may change when another folder or track is being selected or during fast forwarding/reversing. A subfolder is not played back. Subfolders cannot be played when FLD (folder repeat) is selected. Select another repeat play range. NO XXXX appears when a display is changed (NO TITLE, for example). There is no embedded text information. Switch the display or play another track/file. The unit is malfunctioning. There is interference. You are using a device, such as a cellular phone, that transmits electric waves near the unit. Move electrical devices that may be causing the interference away from the unit. Error messages When you contact your dealer or your nearest Pioneer Service Center, be sure to note the error message. Common Message Cause Action AMP ERROR Unit fails to op- Check the speak- erate or speaker er connection. If connection is the message fails incorrect; pro- to disappear even tective circuit is after the engine is activated. switched off/on, contact your deal- er or an author- ized Pioneer Service Station for assistance. CD player Message Cause Action ERROR-07, The disc is dirty. Clean the disc. 11, 12, 17, 30 The disc is Replace the disc. scratched. ERROR-07, 10, 11, 12, 15, 17, 30, A0 There is an elec- Turn the ignition trical or me- switch OFF and chanical error. back ON, or switch to a differ- ent source, then back to the CD player. ERROR-15 The inserted disc is blank. Replace the disc. ERROR-23 Unsupported CD format. Replace the disc. 16 En Message FORMAT READ NO AUDIO SKIPPED PROTECT Cause Action Sometimes Wait until the there is a delay message disap- between the pears and you start of playback hear sound. and when you start to hear any sound. The inserted disc does not contain any playable files. Replace the disc. The inserted disc contains DRM protected files. Replace the disc. All the files on the inserted disc are embedded with DRM. Replace the disc. USB storage device/iPod Message Cause Action FORMAT READ NO AUDIO Sometimes Wait until the there is a delay message disap- between the pears and you start of playback hear sound. and when you start to hear any sound. There are no songs. Transfer the audio files to the USB storage device and connect. The connected Follow the USB USB storage de- storage device in- vice has secur- structions to dis- ity enabled. able the security. Message SKIPPED PROTECT N/A USB CHECK USB CHECK USB Cause Action The connected Play an audio file USB storage de- not embedded vice contains with Windows files embedded Media DRM 9/10. with Windows Mediaä DRM 9/ 10. All the files in Transfer audio the USB storage files not em- device are em- bedded with bedded with Windows Media Windows Media DRM 9/10 to the DRM 9/10. USB storage de- vice and connect. The USB device connected to is not supported by this unit. ! Connect a USB Mass Storage Class compliant device. ! Disconnect your device and replace it with a compatible USB storage device. The USB connector or USB cable has shortcircuited. Check that the USB connector or USB cable is not caught in something or damaged. The connected Disconnect the USB storage de- USB storage de- vice consumes vice and do not more than maxi- use it. Turn the mum allowable ignition switch to current. OFF, then to ACC or ON and then connect only compliant USB storage devices.