Pioneer DEH 2800MP Owner's Manual - Page 12

Section 03 Operating this unit Audio Adjustments Introduction of audio adjustments 3 Press c or d to adjust left/right speaker balance. BAL L 9  BAL R 9 is displayed as the left/right speaker balance moves from left to right. 12 1 Audio display Shows the audio adjustment status. 2 LOUD indicator Appears in the display when loudness is turned on. % Press AUDIO to display the audio function names. Press AUDIO repeatedly to switch between the following audio functions: FAD (balance adjustment)BASS (bass adjustment)MID (mid-range adjustment) TREBLE (treble adjustment)LOUD (loudness)SLA (source level adjustment) # When selecting the FM tuner as the source, you cannot switch to SLA. # If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. # To return to the display of each source, press BAND. Using balance adjustment You can select a fader/balance setting that provides an ideal listening environment in all occupied seats. 1 Press AUDIO to select FAD. # If the balance setting has been previously adjusted, BAL will be displayed. 2 Press a or b to adjust front/rear speaker balance. FAD F15  FAD R15 is displayed as the front/ rear speaker balance moves from front to rear. # FAD 0 is the proper setting when only two speakers are used. Using the equalizer There are six stored equalizer settings such as DYNAMIC, VOCAL, NATURAL, CUSTOM, FLAT and POWERFUL that can easily be recalled at any time. ! CUSTOM is an adjusted equalizer curve that you create. ! When FLAT is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between FLAT and a set equalizer curve. % Press EQ to select the equalizer. Press EQ repeatedly to switch between the following equalizers: DYNAMICVOCALNATURALCUSTOM FLATPOWERFUL Adjusting equalizer curves You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CUSTOM. Adjusting bass/mid/treble You can adjust the bass/mid/treble level. 1 Press AUDIO to select BASS/MID/ TREBLE. 2 Press a or b to adjust the level. +6  6 is displayed as the level is increased or decreased. Adjusting loudness Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 Press AUDIO to select LOUD. 12 En