Pioneer DEH 2800MP Owner's Manual - Page 13
Other Functions, Operating this unit, Adjusting source levels, Setting the clock - set clock
UPC - 012562776293
View all Pioneer DEH 2800MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Operating this unit Section 03 English 2 Press a to turn loudness on. LOUD indicator is displayed. # To turn loudness off, press b. # You can also turn loudness on or off by pressing and holding EQ. 3 Press c or d to select a desired level. LOW (low)HI (high) Adjusting source levels SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. ! Settings are based on the FM tuner volume level, which remains unchanged. ! The AM tuner volume level can also be ad- justed with source level adjustments. 1 Compare the FM tuner volume level with the level of the source you wish to adjust. 2 Press AUDIO to select SLA. 3 Press a or b to adjust the source volume. SLA +4 SLA 4 is displayed as the source volume is increased or decreased. 4 Press a or b to set the clock. Pressing a will increase the selected hour or minute. Pressing b will decrease the selected hour or minute. # To cancel clock settings, press BAND. # You can also cancel clock settings by holding down AUDIO until the unit turns off. Turning the clock display on or off You can turn the clock display on or off. % Press CLOCK to turn the clock display on or off. Each press of CLOCK turns the clock display on or off. # The clock display disappears temporarily when you perform other operations, but the clock display appears again after 25 seconds. Other Functions Setting the clock Use these instructions to set the clock. 1 Press SOURCE and hold until the unit turns off. 2 Press AUDIO and hold until clock appears in the display. 3 Press c or d to select the segment of the clock display you wish to set. Pressing c or d will select one segment of the clock display: HourMinute As you select segments of the clock display the segment selected will blink. En 13