Pioneer DEH-3400 Owner's Manual - Page 11

English Español Built-in CD player Playing a CD 1 2 1 TRACK NUMBER indicator Shows the track currently playing. 2 PLAY TIME indicator Shows the elapsed playing time of the current track. 1 Press OPEN to open the front panel. CD loading slot appears. 2 Insert a CD into the CD loading slot. Playback will automatically start. CD loading slot CD EJECT button • You can eject a CD by pressing CD EJECT. 3 Close the front panel. 4 Use VOLUME to adjust the sound level. Rotate to increase or decrease the volume. 5 To perform fast forward or reverse, press and hold 2 or 3. 6 To skip back or forward to another track, press 2 or 3. Pressing 3 skips to the start of the next track. Pressing 2 once skips to the start of the current track. Pressing again will skip to the previous track. Notes • The built-in CD player plays one, standard, 12-cm or 8-cm (single) CD at a time. Do not use an adapter when playing 8-cm CDs. • Do not insert anything other than a CD into the CD loading slot. • If you cannot insert a disc completely or if after you insert a disc the disc does not play, check that the label side of the disc is up. Press CD EJECT to eject the disc, and check the disc for damage before inserting the disc again. • If the built-in CD player does not operate properly, an error message such as ERROR-14 may be displayed. Refer to Understanding built-in CD player error messages on page 17. Deutsch Français Italiano Nederlands • After a CD has been inserted, press SOURCE to select the built-in CD player. En 10