Pioneer DEH-3400 Owner's Manual - Page 13

English Español Audio Adjustments Introduction of audio adjustments 1 2 1 AUDIO display Shows the audio adjustments status. 2 LOUD indicator Appears in the display when loudness is turned on. Press AUDIO to display the audio function names. Press AUDIO repeatedly to switch between the following audio functions: FAD (balance adjustment)-EQ-L (equalizer)- LOUD (loudness)-FIE (front image enhancer)-SLA (source level adjustment) • When selecting the FM tuner as the source, you cannot switch to SLA. • To return to the display of each source, press BAND. Using balance adjustment You can select a fader/balance setting that provides an ideal listening environment in all occupied seats. 1 Press AUDIO to select FAD. Press AUDIO until FAD appears in the display. • If the balance setting has been previously adjusted, BAL will be displayed. 2 Press 5 or ∞ to adjust front/rear speaker balance. Each press of 5 or ∞ moves the front/rear speaker balance towards the front or the rear. • FAD F15 - FAD R15 is displayed as the front/rear speaker balance moves from front to rear. • FAD 0 is the proper setting when only two speakers are used. 3 Press 2 or 3 to adjust left/right speaker balance. When you press 2 or 3, BAL 0 is displayed. Each press of 2 or 3 moves the left/right speaker balance towards the left or the right. • BAL L9 - BAL R9 is displayed as the left/right speaker balance moves from left to right. Note • If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. Deutsch Français Italiano Nederlands En 12