Pioneer DEH P4100UB Installation Manual - Page 1
Pioneer DEH P4100UB - Radio / CD Manual
UPC - 012562941370
View all Pioneer DEH P4100UB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
CD RECEIVER AUTORADIO CD RADIO CD DEH-P4100UB Installation Manual Manuel d'installation Manual de instalación Printed in China Imprimé en Chine UC Installation Note • Check all connections and systems before final installation. • Do not use unauthorized parts. The use of unauthorized parts may cause malfunctions. • Consult with your dealer if installation requires drilling of holes or other modifications of the vehicle. • Do not install this unit where: - it may interfere with operation of the vehicle. - it may cause injury to a passenger as a result of a sudden stop. • The semiconductor laser will be damaged if it overheats. Install this unit away from hot places such as near the heater outlet. • Optimum performance is obtained when the unit is installed at an angle of less than 60°. 60° DIN Front/Rear-mount This unit can be properly installed either from "Front" (conventional DIN Front-mount) or "Rear" (DIN Rear-mount installation, utilizing threaded screw holes at the sides of unit chassis). For details, refer to the following installation methods. DIN Front-mount Installation with metal strap and screws 1. Insert the mounting sleeve into the dashboard. • When installing in a shallow space, use a supplied mounting sleeve. If there is enough space behind the unit, use factory supplied mounting sleeve. English 2. Secure the mounting sleeve by using a screwdriver to bend the metal tabs (90°) into place. Dashboard Mounting sleeve 182 53 3. Install the unit. • Use commercially available parts when installing. Nut Filrewall or metal support Screw Metal strap Screw (M48) • Make sure that the unit is installed securely in place. Unstable installation may cause this unit to malfunction, such as sound skip. Removing the Unit 1. Extend top and bottom of the trim ring outwards to remove the trim ring. When reattaching the trim ring, push the trim ring onto the unit until it clicks. (If the trim ring is attached upside down, the trim ring will not fit properly.) • It becomes easy to remove the trim ring if the front panel is released. Trim ring Installation 2. Insert the supplied extraction keys into both sides of the unit until they click into place. English 3. Tighten two screws on each side. • Use either truss screws (5 mm × 8 mm) or flush surface screws (5 mm × 9 mm), depending on the shape of screw holes in the bracket. Screw 3. Pull the unit out of the dashboard. DIN Rear-mount 1. Extend top and bottom of the trim ring outwards to remove the trim ring. When reattaching the trim ring, push the trim ring onto the unit until it clicks. (If the trim ring is attached upside down, the trim ring will not fit properly.) • It becomes easy to remove the trim ring if the front panel is released. Dashboard or Console Factory radio mounting bracket Fastening the front panel If you do not plan to detach the front panel, the front panel can be fastened with supplied screw. Screw Trim ring 2. Determine the appropriate position where the holes on the bracket and the side of the unit match.