Pioneer DEH P4100UB Installation Manual - Page 3

When not connecting a rear speaker leard to a subwoofer 1.5 m (4 ft. 9 in.) 1. USB cable Connect to separately sold USB device. 3. Rear output 2. This product 20 cm (7-7/8 in.) 29. To rear output 4. Front output 5. Antenna jack 6. Subwoofer output 11. Fuse (10 A) 7. Wired remote input Hard-wired remote control adaptor can be connected (sold separately). 8. IP-BUS input (Blue) 10. Multi-CD player 9. IP-BUS cable (sold separately) 30. To front output 31. To subwoofer output 33. Power amp (sold separately) 32. Connect with RCA cables (sold separately) 33. Power amp (sold separately) 33. Power amp (sold separately) 12. Yellow Connect to the constant 12 V supply terminal. 13. Red Connect to terminal controlled by ignition switch (12 V DC). 14. Orange/white Connect to lighting switch terminal. 15. Black (chassis ground) Connect to a clean, paint-free metal location. 20. Front speaker 21. Left 27. Rear speaker 16. White 18. Gray     17. White/black 19. Gray/black 23. Green 25. Violet     24. Green/black 26. Violet/black 20. Front speaker 22. Right 27. Rear speaker 28. With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers. 35. System remote control 34. Blue/white Connect to system control terminal of the power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC). 36. Perform these connections when using the optional amplifier.  37.Subwoofer   20. Front speaker   27. Rear speaker   37.Subwoofer   20. Front speaker   27. Rear speaker  When using a subwoofer without using the optional amplifier 1.5 m (4 ft. 9 in.) 1. USB cable Connect to separately sold USB device. 3. Rear output 2. This product 20 cm (7-7/8 in.) 4. Front output 5. Antenna jack 6. Subwoofer output 11. Fuse (10 A) 12. Yellow Connect to the constant 12 V supply terminal. 13. Red Connect to terminal controlled by ignition switch (12 V DC). 14. Orange/white Connect to lighting switch terminal. 7. Wired remote input Hard-wired remote control adaptor can be connected (sold separately). 8. IP-BUS input (Blue) 10. Multi-CD player 9. IP-BUS cable (sold separately) 34. Blue/white Connect to system control terminal of the power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC).  20. Front speaker  21. Left  39. Subwoofer (4 Ω)  16. White 18. Gray 17. White/black 19. Gray/black 23. Green 25. Violet 24. Green/black 26. Violet/black  20. Front speaker  22. Right  39. Subwoofer (4 Ω)  15. Black (chassis ground) Connect to a clean, paint-free metal location. 38. Note: Change the initial setting of this unit. The subwoofer output of this unit is monaural. 40. When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit. Do not connect anything with Green and Green/black leads. 23. Green 41. Not used. 24. Green/black 25. Violet 26. Violet/black  42. Subwoofer (4 Ω)  2 