Pioneer DEH-P5100UB Installation Manual - Page 2

Connecting the unit, English - usb

Page 2 highlights

Connecting the unit English When not connecting a rear speaker lead to a subwoofer Connecting the unit English Pioneer CD-U150E USB cable (sold separately) Rear output Front output Subwoofer output This product Antenna jack Fuse (10 A) USB port 2 Use a USB cable to connect the USB storage 20 cm device to the USB port 2. (7-7/8 in.) Pioneer CD-U150E USB cable is also available. For details, consult your dealer. Wired remote input Hard-wired remote control adaptor can be connected (sold separately). To rear output To front output IP-BUS input (Blue) Multi-CD player (sold separately) IP-BUS cable To subwoofer output Connect with RCA cables (sold separately) Power amp (sold separately) Power amp (sold separately) Power amp (sold separately) Yellow Connect to the constant 12 V supply terminal. Red Connect to terminal controlled by ignition switch (12 V DC). Orange/white Connect to lighting switch terminal. Black (chassis ground) Connect to a clean, paint-free metal location. Yellow/black If you use an equipment with Mute function, wire this lead to the Audio Mute lead on that equipment. If not, keep the Audio Mute lead free of any connections. System remote control Blue/white Connect to system control terminal of the power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC). Perform these connections when using the optional amplifier. Front speaker Left Rear speaker White Gray White/black Green Gray/black Violet Front speaker Right Rear speaker Green/black Violet/black With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers. Subwoofer Front speaker Rear speaker Subwoofer Front speaker Rear speaker Connecting the unit English When using a subwoofer without using the optional amplifier Connecting the unit English Pioneer CD-U150E USB cable (sold separately) Rear output Front output Subwoofer output This product Antenna jack Fuse (10 A) Yellow/black If you use an equipment with Mute function, wire this lead to the Audio Mute lead on that equipment. If not, keep the Audio Mute lead free of any connections. Yellow Connect to the constant 12 V supply terminal. Red Connect to terminal controlled by ignition switch (12 V DC). Orange/white Connect to lighting switch terminal. Black (chassis ground) Connect to a clean, paint-free metal location. Note Change the initial setting of this unit. The subwoofer output of this unit is monaural. USB port 2 Use a USB cable to connect the USB storage 20 cm device to the USB port 2. (7-7/8 in.) Pioneer CD-U150E USB cable is also available. For details, consult your dealer. Wired remote input Hard-wired remote control adaptor can be connected (sold separately). IP-BUS input (Blue) Multi-CD player (sold separately) IP-BUS cable Front speaker Left Subwoofer (4 Ω) Blue/white Connect to system control terminal of the power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC). White Gray White/black Gray/black Green Violet Green/black Violet/black Front speaker Right Subwoofer (4 Ω) When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit. Do not connect anything with Green and Green/black leads. Not used. Green Green/black Violet Violet/black Subwoofer (4 Ω) 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

Connecting the unit
English
Connecting the unit
English
When using a subwoofer without using the optional amplifier
Connecting the unit
English
Connecting the unit
English
When not connecting a rear speaker lead to a subwoofer
This product
Front output
Antenna jack
Subwoofer output
Fuse (10 A)
Rear output
IP-BUS input (Blue)
IP-BUS cable
Multi-CD player
(sold separately)
Wired remote input
Hard-wired remote control
adaptor can be connected
(sold separately).
20 cm
(7-7/8 in.)
Pioneer CD-U150E USB cable
(sold separately)
USB port 2
Use a USB cable to connect the USB storage
device to the USB port 2.
Pioneer CD-U150E USB cable is also available.
For details, consult your dealer.
±
±
²
²
±
±
²
²
Yellow/black
If you use an equipment with Mute function,
wire this lead to the Audio Mute lead on that
equipment. If not, keep the Audio Mute lead
free of any connections.
±
²
±
²
±
²
±
²
Power amp
(sold separately)
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by
ignition switch (12 V DC).
Orange/white
Connect to lighting switch terminal.
Connect with RCA cables
(sold separately)
Perform these connections
when using the optional
amplifier.
Black (chassis ground)
Connect to a clean, paint-free metal location.
System remote control
Left
Right
Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal (max.
300 mA 12 V DC).
With a 2 speaker system, do not
connect anything to the speaker leads
that are not connected to speakers.
Front speaker
Front speaker
Rear speaker
Rear speaker
White
Gray
Gray/black
White/black
Green
Violet
Green/black
Violet/black
Power amp
(sold separately)
±
²
Front speaker
±
²
Power amp
(sold separately)
To subwoofer
output
To front output
To rear output
Front speaker
Rear speaker
Rear speaker
Subwoofer
Subwoofer
This product
Front output
Antenna jack
Subwoofer output
Fuse (10 A)
Rear output
IP-BUS input (Blue)
IP-BUS cable
Multi-CD player
(sold separately)
Wired remote input
Hard-wired remote control
adaptor can be connected
(sold separately).
20 cm
(7-7/8 in.)
Pioneer CD-U150E USB cable
(sold separately)
USB port 2
Use a USB cable to connect the USB storage
device to the USB port 2.
Pioneer CD-U150E USB cable is also available.
For details, consult your dealer.
±
²
±
²
±
²
±
²
Left
Right
Front speaker
Front speaker
White
Gray
Gray/black
White/black
Green
Violet
Green/black
Violet/black
Green
Violet
Green/black
Violet/black
Subwoofer (4
)
Subwoofer (4
)
When using a subwoofer of 70 W (2
), be sure to connect
with Violet and Violet/black leads of this unit.
Do not connect anything with Green and Green/black leads.
Subwoofer
(4
)
±
2
Not used.
Note
Change the initial setting of this unit.
The subwoofer output of this unit is monaural.
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Orange/white
Connect to lighting switch terminal.
Black (chassis ground)
Connect to a clean, paint-free metal location.
Blue/white
Connect to system control
terminal of the power amp or
auto-antenna relay control
terminal (max. 300 mA 12 V DC).
±
²
Yellow/black
If you use an equipment with Mute function, wire this lead to the Audio
Mute lead on that equipment. If not, keep the Audio Mute lead free of
any connections.