Pioneer DEH-P7600MP Owner's Manual - Page 14
Listening to the radio, Tuner - display
![]() |
View all Pioneer DEH-P7600MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Section 04 Tuner Listening to the radio 1 23 4 5 These are the basic steps necessary to operate the radio. More advanced tuner operation is explained starting on the next page. 1 Stereo (ST) indicator Shows that the frequency selected is being broadcast in stereo. 2 LOC indicator Shows when local seek tuning is on. 3 Band indicator Shows which band the radio is tuned to, AM or FM. 4 Preset number indicator Shows what preset has been selected. 5 Frequency indicator Shows to which frequency the tuner is tuned. 1 Press SOURCE to select the tuner. Press SOURCE until you see Tuner displayed. 2 Use VOLUME to adjust the sound level. Rotate to increase or decrease the volume. 3 Press BAND to select a band. Press BAND until the desired band is displayed, FM1, FM2, FM3 for FM or AM. 4 To perform manual tuning, press c or d with quick presses. The frequencies move up or down step by step. 5 To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found. # You can cancel seek tuning by pressing either c or d with a quick press. # If you press and hold c or d you can skip broadcasting stations. Seek tuning starts as soon as you release the buttons. 14 En
![](/manual_guide/products/pioneer-dehp7600mp-owners-manual-1a843a1/14.png)