Pioneer DEH-P80MP Operation Manual - Page 46

Section 10 XM tuner CH NUMBER (channel number select setting) CATEGORY (channel category select setting) # You can also switch the XM channel select setting in the menu that apears by using Multi-Control. Selecting the channel in the channel category 1 Press CLOCK and hold to switch the channel select setting. 2 Press CLOCK to select the desired channel select setting. Press CLOCK repeatedly to switch between the following channel select settings: CH NUMBER (channel number select setting) CATEGORY (channel category select setting) # You can also switch the XM channel select setting in the menu that apears by using Multi-Control. 3 Push Multi-Control up or down to select the desired channel category. 4 Push Multi-Control left or right to select the desired channel in the selected channel category. 2 Use NUMBER on the remote control to input the desired channel number. # To cancel the input numbers, press CLEAR on the remote control. 3 While the input number is displayed, press DIRECT on the remote control. The entered XM channel is selected. Display the ID code Channel number select setting If you select CH : 000, the ID code is displayed. % Push Multi-Control left or right to select CH : 000. Channel category select setting RADIO ID is provided as a channel category for displaying the ID code. % Push Multi-Control up or down to select RADIO ID from channel category. # If you select another channel, display of the ID code is canceled. # Display of the ID code repeats displaying RADIO ID and the ID code one after the other. Selecting the XM channel directly You can select the XM channel directly by entering the desired channel number. ! You cannot operate this mode from func- tion display. 1 Touch DIRECT on the remote control. CHANNEL INPUT appears in the display. 46 En