Pioneer DEH-X3700UI Owner's Manual - Page 16
Additional Information - amp error
View all Pioneer DEH-X3700UI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Additional Information Troubleshooting The display automatically returns to the normal display. No operations have been made for about 30 seconds. - Perform an operation. The repeat play range changes unexpectedly. Depending on the repeat play range, the selected range may change when another folder or track is being selected or during fast forwarding/reversing. - Select the repeat play range again. A subfolder is not played back. Subfolders cannot be played when [FLD] (folder repeat) is selected. - Select another repeat play range. The sound is intermittent. You are using a device, such as a cellular phone, that may cause audible interference. - Move electrical devices that may be causing the interference away from the unit. Error messages Common AMP ERROR This unit fails to operate or the speaker connection is incorrect. The protective circuit is activated. - Check the speaker connection. - Turn the ignition switch OFF and back to ON again. If the message remains, contact your dealer or an authorized Pioneer Service Station for assistance. 16 En NO XXXX (NO TITLE, for example) There is no embedded text information. - Switch the display or play another track/file. CD player ERROR-07, 11, 12, 17, 30 The disc is dirty. - Clean the disc. The disc is scratched. - Replace the disc. ERROR-07, 10, 11, 12, 15, 17, 30, A0 There is an electrical or mechanical error. - Turn the ignition switch OFF and back to ON, or switch to a different source, then back to the CD player. ERROR-15 The inserted disc is blank. - Replace the disc. ERROR-23 Unsupported CD format. - Replace the disc. FORMAT READ Sometimes there is a delay between the start of playback and when you start to hear any sound. - Wait until the message disappears and you hear sound. NO AUDIO The inserted disc does not contain any playable files. - Replace the disc. SKIPPED The inserted disc contains DRM protected files. - The protected files are skipped. PROTECT All the files on the inserted disc are embedded with DRM. - Replace the disc. USB device/iPod FORMAT READ Sometimes there is a delay between the start of playback and when you start to hear any sound. - Wait until the message disappears and you hear sound. NO AUDIO There are no songs. - Transfer the audio files to the USB device and connect. The connected USB device has security enabled. - Follow the USB device instructions to disable the security. SKIPPED The connected USB device contains DRM protected files. - The protected files are skipped. PROTECT All the files on the connected USB device are embedded with DRM. - Replace the USB device. N/A USB The connected USB device is not supported by this unit. - Disconnect your device and replace it with a compatible USB device. CHECK USB The USB connector or USB cable has short-circuited. - Check that the USB connector or USB cable is not caught in something or damaged. The connected USB device consumes more than maximum allowable current. - Disconnect the USB device and do not use it. Turn the ignition switch OFF and back to ACC or ON. Connect only compliant USB devices. The iPod operates correctly but does not charge. - Make sure the connection cable for the iPod has not shorted out (e.g., not caught in metal objects). After checking, turn the ignition switch OFF and back to ON, or disconnect the iPod and reconnect. ERROR-19 Communication failed. - Perform one of the following operations, then return to the USB source. • Turn the ignition switch OFF and back to ON. • Disconnect the USB device. • Change to a different source. iPod failure. - Disconnect the cable from the iPod. Once the iPod's main menu is displayed, reconnect the iPod and reset it. ERROR-23 USB device was not formatted properly. - Format the USB device with FAT12, FAT16 or FAT32. ERROR-16 The iPod firmware version is old. - Update the iPod version. iPod failure. - Disconnect the cable from the iPod. Once the iPod's main menu is displayed, reconnect the iPod and reset it. STOP There are no songs in the current list. - Select a list that contains songs.