Pioneer DEH1400 Owner's Manual - Page 10

Built-in CD player 4 To perform fast forward or reverse, press and hold 2 or 3. 5 To skip back or forward to another track, press 2 or 3. Pressing 3 skips to the start of the next track. Pressing 2 once skips to the start of the current track. Pressing again will skip to the previous track. Notes • The built-in CD player plays one, standard, 12-cm or 8-cm (single) CD at a time. Do not use an adapter when playing 8-cm CDs. • Do not insert anything other than a CD into the CD loading slot. • If you cannot insert a disc completely or if after you insert a disc the disc does not play, check that the label side of the disc is up. Press CD EJECT to eject the disc, and check the disc for damage before inserting the disc again. • If the built-in CD player does not operate properly, an error message such as ERR 14 may be displayed. Refer to Understanding built-in CD player error messages on page 15. Playing tracks in a random order Random play lets you play back tracks on the CD in a random order. 1 Press 4 to turn random play on. RDM appears in the display. Tracks will play in a random order. 2 Press 4 to turn random play off. Tracks will continue to play in order. Repeating play Repeat play lets you hear the same track over again. 1 Press 5 to turn repeat play on. RPT appears in the display. The track presently playing will play and then repeat. 2 Press 5 to turn repeat play off. The track presently playing will continue to play and then play the next track. Note • If you perform track search or fast forward/reverse, repeat play is automatically cancelled. Pausing CD playback Pause lets you temporarily stop playback of the CD. 1 Press 6 to turn pause on. PAUSE appears in the display. Play of the current track pauses. 2 Press 6 to turn pause off. Play will resume at the same point that you turned pause on. 9 En