Pioneer DEX-P98R Operation Manual - Page 12
Operating this unit
View all Pioneer DEX-P98R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Section 02 Operating this unit ! If the HD Radio tuner is connected to this unit, tuner source is skipped. ! AUX1 is set to on by default. Turn off the AUX1 when not in use (refer to Switching the auxiliary setting on page 36). ! Charging the portable audio player using car's DC power source while connecting it to AUX input may generate noise. In this case, stop charging. ! External unit refers to a Pioneer product (such as ones available in the future) that, although incompatible as a source, enables control of basic functions with this unit. Two external units can be controlled with this unit. When two external units are connected, the external unit is automatically allocated to external unit 1 or external unit 2 by this unit. ! When this unit's blue/white lead is connected to the vehicle's auto-antenna relay control terminal, the vehicle's antenna extends when this unit's source is turned on. To retract the antenna, turn the source off. ! Certain devices may need to be switched on before being connected to this unit. Loading a disc 1 Press h/Open to open the front panel. CD loading slot appears. 2 Insert a CD into the CD loading slot. Front panel is closed automatically, and playback will start. ! When loading a CD/CD-R/CD-RW, face the label side of a disc up. CD loading slot # After a CD has been inserted, press SRC/Off to select the built-in CD player. Notes ! The built-in CD player plays one, standard, 12cm CD (-R/-RW) at a time. Playing back an 8cm disc is not possible with this unit. ! The built-in CD player can play back audio CD and compressed audio recorded on a CDROM. (Please see the following section for files that can be played back. Refer to page 71.) ! Read the precautions for the player and discs in the following section. Refer to page 70. ! Do not insert anything other than a CD into the CD loading slot. ! There is sometimes a delay between starting up disc playback and the sound being issued. When being read, FORMAT READ is displayed. ! If you cannot insert a disc completely or if after you insert a disc the disc does not play, check that the label side of the disc is up. Press h/Open to eject the disc, and check the disc for damage before inserting it again. ! When the disc loading or ejecting function does not operate properly, you can eject the disc by pressing and holding h/Open while opening the front panel. ! If an error message is displayed, refer to Error messages on page 68. Adjusting the volume % Use Vol to adjust the sound level. # With the remote control, press VOL +/VOL - to adjust the volume. # You can eject a disc by pressing h/Open. 12 En