Pioneer DEX-P98R Operation Manual - Page 35
Adjusting initial settings, Selecting the display language, Setting the speakers, Initial Settings
View all Pioneer DEX-P98R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Initial Settings Section 04 Initial Settings Adjusting initial settings Using the initial settings, you can customize various system settings to achieve optimal performance from this unit. 1 Function display Shows the function status. 1 Press SRC/Off and hold until the unit turns off. 2 Press MULTI-CONTROL and hold until the initial setting menu appears in the display. 3 Turn MULTI-CONTROL to select one of the initial settings. Turn MULTI-CONTROL to switch between the functions in the following order. Language select (language selection)- SP connection (speaker setting)-Clock (clock)-Warning tone (warning tone)- Face auto open (face auto open)-AUX1 (auxiliary input 1)-AUX2 (auxiliary input 2)- Dimmer (dimmer)-Brightness (brightness) -Illumination 1 (illumination select)- Illumination 2 (custom illumination)- ILL line (illumination interlock)-Digital ATT (digital attenuation)-Audio Reset (audio reset)-Mute (sound muting/attenuation)- Door mute 1 (intelligent mute polarity setting) -Door mute 2 (intelligent mute setting)- Reverse mode (reverse mode)-Ever-scroll (ever scroll)-BT AUDIO (Bluetooth audio)- Pin code input (pin code input)- BT Version Info. (Bluetooth version information) Use the following instructions to operate each particular setting. # BT AUDIO, Pin code input and BT Version Info. can be selected only when Blue- tooth adapter (e.g., CD-BTB200) is connected to this unit. # To cancel initial settings, press B. Selecting the display language For your convenience, this unit equips multiple language display. You can select the language best suited to your first language. 1 Use MULTI-CONTROL to select Language select in the initial setting menu. Refer to Adjusting initial settings on this page. 2 Press MULTI-CONTROL to select the language. Each press of MULTI-CONTROL selects languages in the following order: English-Français-Español Setting the speakers You need to set the speakers used with this system. When this setting is performed correctly, this unit reproduces high-definition sound suited to your system. ! You cannot change the middle-range speaker setting. (The middle-range speaker is always on.) ! If this setting is adjusted after performing auto-time alignment and auto-equalizing function, perform auto-time alignment and auto-equalizing again. 1 Use MULTI-CONTROL to select SP connection in the initial setting menu. Refer to Adjusting initial settings on this page. 2 Push MULTI-CONTROL left or right to select the speaker to be adjusted. Each time MULTI-CONTROL is pushed left or right, the speaker is selected in the following order: Subwoofer (subwoofer)-Low range (low range speaker)-High range (high range speaker) En 35