Pioneer DJM-2000 Owner's Manual - Page 13
Basic Operation - specifications
UPC - 884938100656
View all Pioneer DJM-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
x Crossfader (page 13) y MASTER (page 13) z Master Level Indicator (page 13) A BALANCE (page 14) B MONO, STEREO (page 14) C BOOTH MONITOR (page 14) D START/STOP (SNAPSHOT) (page 17) E ON/OFF (MIDI) (page 17) F CH EQ (ISOLATOR, EQ) (page 13) G CH FADER ( , ) (page 14) H CROSS FADER ( , , ) (page 14) Basic Operation Outputting sound 1 Press [POWER]. Turn on the power of this unit. 2 Switching the [CD/DIGITAL, PHONO, LINE, USB */*] switch Select the input sources for the different channels from among the devices connected to this unit. - [CD/DIGITAL]: Selects the DJ player connected to the [CD] terminals. To select the DJ player connected to the [DIGITAL IN] terminal, set the [CD, DIGITAL] switch on the rear panel to [DIGITAL]. - [PHONO]: Selects the analog player connected to the [PHONO] terminals. - [LINE]: Selects the cassette deck or CD player connected to the [LINE] terminals. - [USB */*]: Selects the sound of the computer connected to the [USB] port. 3 Rotate [TRIM]. Adjusts the level of audio signals input in each channel. The corresponding channel level indicator lights when audio signals are being properly input to that channel. 4 Set the channel fader to the inner position. Adjusts the level of audio signals output in each channel. 5 Switch the [CROSS FADER ASSIGN (A, THRU, B)] switch. Switches the output destination of each channel. - [A]: Assigns to [A] (left) of the crossfader. - [B]: Assigns to [B] (right) of the crossfader. - [THRU]: Choose this when you do not want to use the crossfader. (The signals do not pass through the crossfader.) 6 Set the crossfader. This operation is not necessary when [CROSS FADER ASSIGN (A, THRU, B)] is set to [THRU]. 7 Turn the [MASTER] control. Audio signals are output from the [MASTER1] and [MASTER2] terminals. The master level indicator lights. Adjusting the sound quality Turn the [EQ/ISO (HI, MID, LOW) ] controls for the individual channels. Refer to Specifications on page 29 for the range of sound that can be adjusted by each control. Switching the [EQ/ISO (HI, MID, LOW)] function. Switch the [CH EQ (ISOLATOR, EQ)] switch. - [ISOLATOR]: The isolator function is set. The indicator lights. - [EQ]: The equalizer function is set. Monitoring sound with headphones 1 Connect headphones to the [PHONES] jack. 2 Press [CUE] for the channel to be monitored. 3 Switch the [MONO SPLIT, STEREO] switch. - [MONO SPLIT]: The sound of the channel for which [CUE] is pressed is output from the headphones output's left channel, while the sound of [MASTER] is output from the right channel. - [STEREO]: The sound of the channel for which [CUE] is pressed is output in stereo from the headphones. 4 Turn the [MIXING] control. This adjusts the balance of the monitor volume between the sound of the channel for which [CUE] is pressed and the [MASTER] channel sound. 5 Turn the [LEVEL] control for [HEADPHONES]. Sound is output from the headphones in the channel selected by [CUE]. ! Monitoring is canceled when [CUE] is pressed again. ! When [LIVE SAMPLER] is turned on, [CUE] button for the TOUCH PANEL EFFECT and [CUE] button for the [LINK] cannot be pressed simultaneously. En 13 English