Pioneer DJM-2000 Owner's Manual - Page 25

English Changing the settings 1 Press [LIVE SAMPLER (UTILITY, WAKE UP)] for at least 1 seconds. The [USER SETUP] screen appears. 1 The [LIVE SAMPLER (UTILITY, WAKE UP)] indicator flashes. ! To display the [CLUB SETUP] screen, first turn this unit's power off, then press [POWER] while pressing [LIVE SAMPLER (UTILITY, WAKE UP)]. 2 Press the setup item button. The selection items appear. 3 Select the setup item. Select the item on the touch panel and enter it. 4 Change the item's setting. Select the item on the touch panel and enter it. ! Press [SAVE] to save the changes to the [CLUB SETUP] screen. 1 Setup item button 5 Press [EXIT]. The [USER SETUP] screen closes. ! To close the [CLUB SETUP] screen, press [POWER] to turn this unit's power off. Setting preferences Settings indicated in italics are the default settings set upon purchase. Mode Options settings Selection item 1 Selection item 2 MIDI USER SETUP ZONE11 ZONE22 BUTTON ACTION MIDI CHANNEL BUTTON ACTION MIDI CHANNEL RESET Selection item 3 TOGGLE TRIGGER 1, 2, to 16 TOGGLE TRIGGER 1, 2, to 16 - FADER START LINK CONTROL CH1 to CH4 CH2, CH3 ON, OFF ON, OFF LCD VERSION No. SYSTEM CLUB SETUP MIC BACK LIGHT - DIGITAL OUT MAX LEVEL DIGITAL SAMPLING RATE AUTO STANDBY OUTPUT TO BOOTH MONITOR TALK OVER THRESHOLD LEVEL 1, 2, 3, 4, 5 - - - -19 dB, -15 dB, -10 dB, - -5 dB 48 kHz, 96 kHz - ON, OFF - ON, OFF - -25 dB, -20 dB, -15 dB, -10 dB - TALK OVER LEVEL -25 dB, -20 dB, -15 dB, -10 dB - TOUCH PANEL - - - FACTORY RESET YES, NO - - 1 Changes the MIDI settings of the buttons on the control panel, [FREQUENCY MIX] and [SIDECHAIN REMIX]. 2 Changes the MIDI settings for [TYPE A] to [TYPE D] on the MIDI control screen. Descriptions Select the MIDI signal sending method, [TOGGLE] or [TRIGGER]. Sets the MIDI channel. Select the MIDI signal sending method, [TOGGLE] or [TRIGGER]. Sets the MIDI channel. Restores the [TYPE A] - [TYPE D] MIDI settings to the default values. [RESET] function is unique to [ZONE2]. Turns the fader start function of the DJ players connected to the [LINK] terminals on and off. Turns the fader start function of the DJ players connected to the [CONTROL] terminals on and off. Adjusts the touch panel's brightness. Displays the DJM-2000's software version. Adjusts the maximum audio level output from the [DIGITAL OUT] terminal. Switches the digital signal sampling rate. Turns the auto standby function on and off. Sets whether or not to output the microphone's audio signals from [BOOTH] terminals. Sets the talkover sensitivity. The talkover function is activated when a sound with a volume above the set volume is input to the microphone. Sets the attenuation level for the sound other than the microphone's sound when the talkover function is activated. The touch panel's calibration is adjusted by pressing [+] in order. Restores all the settings to their factory defaults. About the auto standby function When [AUTO STANDBY] is set to [ON], the standby mode is set automatically if 4 hours pass with all of the conditions below met. - That none of this unit's buttons or controls are operated. - That no audio signals of -10 dB or greater are input to this unit's input terminals. - That no PRO DJ LINK connections are made. ! The standby mode is canceled when [LIVE SAMPLER (UTILITY, WAKE UP)] is pressed. En 25