Pioneer DJM-900SRT Owners Manual - Page 23

MIDI assignment map Category BEAT EFFECTS BEAT EFFECTS MIC SOUND COLOR FX Fader Start HEADPHONES CH SELECT MIDI LFO QUANTIZE TIME Button/Control/Switch Name CH1 CH2 CH3 CH4 MIC CF.A CF.B MASTER Type Switch Switch Switch Switch Switch Switch Switch Switch Control Button Switch Switch LEVEL/DEPTH X-PAD ON/OFF X-PAD (touch) ! When an effect other than [SND/RTN (MIDI LFO)] is selected at BEAT EFFECT ON/OFF X-PAD (touch) ! When [SND/RTN (MIDI LFO)] is selected at BEAT EFFECT HI LOW NOISE SPACE GATE/COMP DUB ECHO CRUSH FILTER Fader Start 1 Fader Start 2 Fader Start 3 Fader Start 4 MIXING LEVEL Timing Clock Control Control Button Button Control Control Button Button Button Button Button Button Button Button Button Button Control Control - MIDI assignment CC 034 CC 035 CC 036 CC 037 CC 038 CC 039 CC 040 CC 041 CC 118 Note 118 CC 013 CC 045 CC 091 CC 116 CC 114 CC 064 CC 030 CC 031 CC 085 CC 105 CC 106 CC 107 CC 086 CC 087 CC 088 CC 089 CC 090 CC 093 CC 027 CC 026 Timing Clock Trigger/Toggle Transmitted data 2 2 2 2 2 2 2 2 - Trigger/Toggle - - - - OFF=0, ON=127 OFF=0, ON=127 OFF=0, ON=127 OFF=0, ON=127 OFF=0, ON=127 OFF=0, ON=127 OFF=0, ON=127 OFF=0, ON=127 0-127 - - TIME value (When FLANGER, PHASER or FILTER is selected, the value is halved. When a negative value is selected, it is set to a positive value.) 0-127 Sends the [X-PAD] position information. 2 OFF=0, ON=127 2 - - Trigger/Toggle1 Trigger/Toggle1 Trigger/Toggle1 Trigger/Toggle1 Trigger/Toggle1 Trigger/Toggle1 Trigger/Toggle Trigger/Toggle Trigger/Toggle Trigger/Toggle - - - OFF=0, ON=127 0-127 0-127 OFF=0, ON=127 OFF=0, ON=127 OFF=0, ON=127 OFF=0, ON=127 OFF=0, ON=127 OFF=0, ON=127 OFF=0, ON=127 OFF=0, ON=127 OFF=0, ON=127 OFF=0, ON=127 0-127 0-127 - Channel fader 1 or crossfader Note 102 - BACK CUE = 0, PLAY = 127 Fader Start operation3 Channel fader 2 or crossfader Channel fader 3 or crossfader Note 103 Note 104 - BACK CUE = 0, PLAY = 127 - BACK CUE = 0, PLAY = 127 MIDI Channel fader 4 or crossfader START STOP Button Button Note 105 START STOP - BACK CUE = 0, PLAY = 127 - - - - 1 When turning one button on switches another button from on to off, MIDI on and off messages are sent from the two buttons. When there is no button that switches off, only the MIDI on message is sent from the button that was pressed. 2 When switched from one position to another position, the MIDI ON and OFF signals are sent respectively from both positions. - When the [START/STOP] button is pressed for over 1 second, MIDI messages corresponding to the positions of the buttons, faders and controls are sent in a bundle (Snapshot). The MIDI Snapshot sends all MIDI messages other than MIDI start and MIDI stop. 3 Operation differs depending on the setting of the [CROSS FADER ASSIGN (A, THRU, B)] selector switch. - When the [CROSS FADER ASSIGN (A, THRU, B)] selector switch is set to [THRU]: MIDI messages are sent when the [FADER START] button is set to [ON] and the channel fader is moved away from you from the nearest position towards you and when it is moved back to the nearest position towards you. - When the [CROSS FADER ASSIGN (A, THRU, B)] selector switch is set to [A]: MIDI messages are sent when the [FADER START] button is set to [ON] and the crossfader is moved from the far edge of the [B] side and when it is moved back to the far edge of the [B] side. - When the [CROSS FADER ASSIGN (A, THRU, B)] selector switch is set to [B]: MIDI messages are sent when the [FADER START] button is set to [ON] and the crossfader is moved from the far edge of the [A] side and when it is moved back to the far edge of the [A] side. En 23