Pioneer DJM-900nexus Owner's Manual - Page 11

Connections ! The message [Installing device driver software] may appear when this unit is first connected to the computer or when it is connected to a different USB port on the computer. Wait awhile until the message [Your devices are ready for use] appears. ! When installing on Windows XP - [Can Windows connect to Windows Update to search for software?] may appear while the installation is in progress. Select [No, not this time], then click [Next] to continue installation. - [What do you want the wizard to do?] may appear while the installation is in progress. Select [Install the software automatically (Recommended)], then click [Next] to continue installation. - If [Windows Security] appears on the screen while the installation is in progress, click [Install this driver software anyway] and continue with the installation. About the setting utility software The setting utility can be used to make the checks and settings described below. - Checking the status of this unit's [DIGITAL, CD/LINE, PHONO, LINE, USB */*] selector switch - Setting the audio data output from this unit to the computer - Adjusting the buffer size (when using Windows ASIO) - Checking the version of the driver software  Displaying the setting utility For Windows Click [Start] menu > [All Programs] > [Pioneer] > [DJM-900nexus] > [DJM900nexus Settings Utility]. For Mac OS X Click [Macintosh HD] icon > [Application] > [Pioneer] > [DJM-900nexus] > [DJM-900nexus Settings Utility].  Checking the status of this unit's [DIGITAL, CD/LINE, PHONO, LINE, USB */*] selector switch Display the setting utility before starting. Click the [MIXER INPUT] tab. CH1 CH2 CH3 CH4 CH1 Timecode PHONO1 CH2 Timecode CD/ LINE1 CH3 Timecode CD/ LINE1 CH4 Timecode PHONO1 CH1 Timecode CD/ LINE1 CH2 Timecode LINE1 CH3 Timecode LINE1 CH4 Timecode CD/ LINE1 CH1 Timecode DIGITAL1 POST CH1 Fader2 Cross Fader A2 Cross Fader B2 CH2 Timecode DIGITAL1 POST CH2 Fader2 Cross Fader A2 Cross Fader B2 CH3 Timecode DIGITAL1 POST CH3 Fader2 Cross Fader A2 Cross Fader B2 CH4 Timecode DIGITAL1 POST CH4 Fader2 Cross Fader A2 Cross Fader B2 MIC REC OUT2 MIC REC OUT2 MIC REC OUT2 MIC REC OUT2 1: The audio data is output with the same volume at which it is input to this unit, regardless of the [USB Output Level] setting. 2: When using for applications other than recording, pay attention to the DJ application's settings so that no audio loops are generated. If audio loops are generated, sound may be input or output at unintended volumes. 3 Click the [USB Output Level] pull-down menu. Adjust the volume of the audio data output from this unit. ! The [USB Output Level] setting is applied equally to all audio data. However, when 1 on the table at step 2 is selected, the audio data is output with the same volume at which it is input to this unit. ! If not enough volume can be achieved with the DJ software's volume adjustment alone, change the [USB Output Level] setting to adjust the volume of the audio data output from this unit. Note that the sound will be distorted if the volume is raised too high.  Adjusting the buffer size (when using Windows ASIO) If an application using this unit as the default audio device (DJ software, etc.) is running, quit that application before adjusting the buffer size. Display the setting utility before starting. Click the [ASIO] tab.  Setting the audio data output from this unit to the computer Display the setting utility before starting. 1 Click the [MIXER OUTPUT] tab. ! If the buffer size is made large, drops in audio data (breaks in the sound) occur less easily, but the time lag due to the delay in the transfer of the audio data (latency) increases.  Checking the version of the driver software Display the setting utility before starting. Click the [About] tab. 2 Click the [Mixer Audio Output] pull-down menu. Select and set the audio data to be output to the computer from the flow of audio signals inside this unit. Checking the latest information on the driver software For the latest information on the driver software for exclusive use with this unit, visit our website shown below. http://www.prodjnet.com/support/ ! Operation cannot be guaranteed when multiple units of this mixer are connected to a single computer. En 11