Pioneer DVD-V7200 DVD-V7200 RS-232C Manual - Page 15

Computer Control 3.4 Error Messages If an error occurs during a command execution, the player returns an error code. The table below lists each code with a description of the error: Code E00 E04 Message Communication error Feature not available E06 Missing argument E11 Disc does not exist E12 Search error Description Communication Line Error due to framing error or buffer overflow Non-Usable Function has been tried - either the command mnemonic is wrong or the command can not be used in this mode Correct parameter is not specified There is no disc in the tray Search address can not be found Read error of Text File; (When the command (UU) is executed) E15 Picture stop Playback has been stopped by a picture stop code while in the Auto Play mode E16 Interrupt by other device The command(s) sent via the serial line were not executed before commands were sent from the front panel buttons and/or remote control unit E99 Panic Forced end of the data transfer while Text File sends to PC (When the command (UU) is executed) Unrecoverable Error occurred - possible that a disc cannot be loaded and/or playing can not continue 3.5 Initial Setting The following table provides the default internal register and switch settings. Take care to set each to the required parameters when creating an application program. Register/Switch Key Lock Video Switch Audio Switch Display Switch Address mode Speed Parameter CCR Register A Register B Register D Setting at Power ON 2 : If set 2 at power OFF 0 : All other cases 1 : ON 3 : Audio 1 0 : OFF 1 : Time 30 : ½ Speed 3 : Mode 3 3 : Title/Chapter and Frame Display (DVD) Track/Time Display (CD, VCD) 0 : Normal Squelch 0 : CR - 7 -