Pioneer DVR-220-S Service Manual - Page 69

Model Setting - region

Get Pioneer DVR-220-S PDF manuals and user guides View all Pioneer DVR-220-S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

5 6 7 8 7.1.2 MODEL SETTING • The Setup is Necessary When : a) When the MAIN Assy is replaced b) When the TUNB Assy is replaced c) When the MAIN Assy and TUNB Assy are replaced Note : Make sure of setting the correct number. A • How to Setup the Model 1) After power on, the following screen is displayed on TV monitor. Press " 29 " for DVR-220-S by using the remote control unit for service(GGF1381). [ Recorder 's Model Setting] Input the number by using the remote for Service. > -- Input No. Model [ 29 : DVR-220-S ] B [ 26 : DVR-225-S ] 2) After 1), the following screen is displayed on TV monitor. Press " 011 " by using the remote control unit for service. [ Recorder 's Type Setting] Input the number by using the remote for Service. > --- (Type -- , Region No. -) Input No. Type [ 01 : KU/CA ] C The setting complete when OSD is disappeared. 3) Unplug the power cable. 4) Reset the recorder to all its factory settings. 1. Make sure that the recorder is on. 2. Press and hold [STOP] and press [STANDBY/ON] key on the front panel. The recorder turns off with all settings reset. 5) Enter the Service Mode and then confirm the Model Name " DVR-220/KU/CA ". 1. Make sure that the recorder is on. D 2. Press [ESC] then [DISP] keys by using the remote control unit for Service. DVR-220/KU/CA VERSION :1.07 SYSCON : RELEASE_44 Rev :1.3599.2.2 TUFLCON : 1.22 MASK DRIVE : DVD-RW DVR-107R 1.03 DADL000219WL $ OK OK OK OK DEVICE : PRISM-PLUS REGION : 1 C E FLASH : 32M Notes : 1) After the setting complete, you can NOT CLEAR the seting data. Make sure the pressing number. 2) " NG " is appeared on TV when unsuitable number is pressed. In such a case, please unplug the power cable and plug it again. Then restart the model setting. F DVR-220-S 69 5 6 7 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
DVR-220-S
69
5
6
7
8
5
6
7
8
C
D
F
A
B
E
7.1.2
MODEL SETTING
• The Setup is Necessary When :
a) When the MAIN Assy is replaced
b) When the TUNB Assy
is replaced
c) When the MAIN Assy and TUNB Assy are replaced
Note : Make sure of setting the correct number.
• How to Setup the Model
1) After power on, the following screen is displayed on TV monitor.
Press " 29 " for DVR-220-S by using the remote control unit for service(GGF1381).
2) After 1), the following screen is displayed on TV monitor.
Press " 011 " by using the remote control unit for service.
Notes :
1) After the setting complete, you can NOT CLEAR the seting data.
Make sure the pressing number.
2) " NG " is appeared on TV when unsuitable number is pressed.
In such a case, please unplug the power cable and plug it again. Then restart the model setting.
The setting complete when OSD is disappeared.
3) Unplug the power cable.
4) Reset the recorder to all its factory settings.
1. Make sure that the recorder is on.
2. Press and hold [STOP] and press [STANDBY/ON] key on the front panel.
The recorder turns off with all settings reset.
5) Enter the Service Mode and then confirm the Model Name " DVR-220/KU/CA ".
1. Make sure that the recorder is on.
2. Press [ESC] then [DISP] keys by using the remote control unit for Service.
[ Recorder 's
Model
Setting]
Input the number by using the remote for Service.
>
--
Input
No.
Model
[
29
:
DVR-220-S
]
[
26
:
DVR-225-S
]
[ Recorder 's
Type
Setting]
Input the number by using the remote for Service.
>
---
(Type
--
,
Region
No.
-)
Input
No.
Type
[
01
:
KU/CA
<US>
]
DVR-220/KU/CA
VERSION
:1.07
SYSCON
: RELEASE_44
Rev
:1.3599.2.2
$
TUFLCON
: 1.22
MASK
OK
DRIVE
:
DVD-RW DVR-107R
OK
1.03
OK
DADL000219WL
OK
DEVICE
: PRISM-PLUS
REGION
:1
C
:
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
FLASH
: 32M