Pioneer DVR-RT500 Owner's Manual - Page 48
Playback, Loading and unloading a cassette tape - s remote
View all Pioneer DVR-RT500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
05 Playback Loading and unloading a cassette tape VCR Use only video cassette tapes marked and . Unloading You can eject the video tape while the unit is turned off. 1 Press EJECT on the unit or the remote control. 2 Remove the cassette tape. • Cassettes marked "VHS" (or "S-VHS") can be used with this video cassette recorder. However, S-VHS recording is not possible with this model. • This model is equipped with SQPB (S-VHS QUASI PLAYBACK) that makes it possible to playback SVHS recordings with regular VHS resolution. • HQ VHS is compatible with existing VHS equipment. Loading Push the center of the tape until it is automatically inserted. Automatic tape eject This VCR will automatically rewind the tape when the tape has ended. And when the tape is rewound to its beginning, the cassette tape will be ejected automatically. To prevent accidental erasure Remove the erase prevention tab with a screwdriver. Screwdriver P Insert the cassette tape with its labeled side facing up and the erase prevention tab positioned at your left. An inverted cassette tape cannot be inserted. Erase prevention tab To record again Cover the hole with a piece of adhesive tape. Erase prevention tab Automatic power ON When you insert a cassette tape the VCR power will turn ON automatically. Automatic playback When loading a cassette tape without an erase prevention tab, playback will start automatically. Adhesive Tape Tape speed and maximum recording time We do not recommend using video tapes longer than 160 minutes. Tape Speed SP (Standard Play) SLP (Super Long Play) T-160 2-2/3 hours 8 hours 48 En T-120 2 hours 6 hours Video cassette tape T-90 1-1/2 hours 4-1/2 hours T-60 1 hour 3 hours T-30 30 minutes 1-1/2 hours