Pioneer FH-S520BT Owners Manual - Page 33
Eq Setting, Speaker Level
View all Pioneer FH-S520BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
English Menu Item Description EQ SETTING [SUPER BASS], [POWERFUL], [DYNAMIC], [NATURAL], [VOCAL], [VIVID], [SET BY APP]*, [CUSTOM1], [CUSTOM2], [FLAT] * [SET BY APP] is displayed when the preset equalizer curve that is not available in the unit has been set from Pioneer Smart Sync. Select or customize the equalizer curve. • When you select a setting other than [CUSTOM1], [CUSTOM2] and [SET BY APP], you can also customize the equalizer curve by pressing and holding the M.C. dial, then store the customized equalizer curve in [CUSTOM1]. Select an equalizer band and level for further customizing. Equalizer band: [50HZ] to [12.5kHZ] Equalizer level: [-6] to [+6] FADER*1*2 (Only for standard mode) BALANCE SUBWOOFER [ON], [OFF] Adjust the front and rear speaker balance. Adjust the left and right speaker balance. Set to [ON] when using a subwoofer speaker. SUBWOOFER*3 [NOR], [REV] Select the subwoofer phase. SPEAKER LEVEL Network mode: [HIGH L], [HIGH Select a speaker unit (filter) and adjust the R], [MID L], [MID R], [SUBWOOFER] output level. Standard mode: [FRONT L], • Each value you have adjusted changes when [FRONT R], [REAR L], [REAR R], you change the [POSITION] setting (page 34). [SUBWOOFER] Output level: [-24] to [10] CROSSOVER Select a speaker unit (filter) to adjust the HPF or LPF cut-off frequency and the slope for each speaker unit. For details on the [CROSSOVER] setting, see page 28. - 33 -