Pioneer GM-D1004 Owner's Manual - Page 11

Connecting the units Section 03 English 4 RCA cable (sold separately) 5 Car stereo with RCA output jacks Connections when using the speaker input wire Connect the car stereo speaker output wires to the amplifier using the supplied SP input cord. 1 4 Car Stereo or navigation system Note If speaker input wires from a head unit are connected to this amplifier, the amplifier will automatically turn on when the head unit is turned on. When the head unit is turned off, the amplifier turns off automatically. This function may not work with some head units. In such cases, make sure that the front L channel is connected correctly. If the function still does not work, please use a system remote control wire.If multiple amplifiers are to be connected together synchronously, connect the head unit and all amplifiers via the system remote control wire. 2 3 4 1 INPUT SELECT (input select) switch 2 SP input cord To signal input terminal of this unit. 3 Speaker cord - White/black: Front SP, Left * - White: Front SP, Left + - Gray/black: Front SP, Right * - Gray: Front SP, Right + - Green/black: Rear SP, Left * - Green: Rear SP, Left + - Violet/black: Rear SP, Right * - Violet: Rear SP, Right + En 11