Pioneer MVH-S400BT Owners Manual - Page 51
No Bt Device Go To Bt Menu
View all Pioneer MVH-S400BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
English SKIPPED → The connected USB device contains DRM protected files. - The protected files are skipped. PROTECT → All the files on the connected USB device are embedded with DRM. - Replace the USB device. N/A USB → The connected USB device is not supported by this unit. - Disconnect your device and replace it with a compatible USB device. HUB ERROR → The USB device connected via a USB hub is not supported by this unit. - Connect the USB device directly to this unit using a USB cable. CHECK USB → The USB connector or USB cable has short-circuited. - Check that the USB connector or USB cable is not caught in something or damaged. → The connected USB device consumes more than maximum allowable current. - Disconnect the USB device and do not use it. Turn the ignition switch OFF and back to ACC or ON. Connect only compliant USB devices. → The iPhone operates correctly but does not charge. - Make sure the connection cable for the iPhone has not shorted out (e.g., not caught in metal objects). After checking, turn the ignition switch OFF and back to ON, or disconnect the iPhone and reconnect. ERROR-19 → Communication failed. - Perform one of the following operations, then return to the USB source. • Turn the ignition switch OFF and back to ON. • Disconnect the USB device. • Change to a different source. → iPhone failure. - Disconnect the cable from the iPhone. Once the iPhone's main menu is displayed, reconnect the iPhone and reset it. ERROR-23 → USB device was not formatted properly. - Format the USB device with FAT12, FAT16 or FAT32. ERROR-16 → The iPhone firmware version is old. - Update the iPhone version. → iPhone failure. - Disconnect the cable from the iPhone. Once the iPhone's main menu is displayed, reconnect the iPhone and reset it. STOP → There are no songs in the current list. - Select a list that contains songs. NO BT DEVICE GO TO BT MENU TO REGISTER → No Bluetooth device found. - Connect the unit and iPhone via Bluetooth (page 15). CONN. FAILED PRESS BAND KEY TO RETRY → Bluetooth connection with iPhone failed. - Press BAND/ to make a connection again. DISCONNECTED PRESS BAND KEY TO RETRY → Bluetooth connection with iPhone failed. - 51 -