Pioneer P8MP Owner's Manual - Page 52
Using the high pass filter, Adjusting source levels, Audio Adjustments
UPC - 012562681221
View all Pioneer P8MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Section 11 Audio Adjustments Adjusting nonfading output level When the nonfading output is on, you can adjust the level of nonfading output. 1 Use Multi-Control to select nonfading output setting. NonFad 0 appears in the display. 2 Push Multi-Control up or down to adjust the nonfading output level. Each pushing Multi-Control up or down increases or decreases the level of the nonfading output. +6 6 is displayed as the level is increased or decreased. Using the high pass filter When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are outputted from the front or rear speakers. 1 Use Multi-Control to select HPF. HPF appears in the display. 2 Press Multi-Control to turn high pass filter on. HPF 80 Hz appears in the display. High pass filter is now on. # To turn high pass filter off, press Multi-Control again. 3 Push Multi-Control left or right to select cut-off frequency. Each pushing Multi-Control left or right selects cut-off frequencies in the following order: 5080125 (Hz) Only frequencies higher than those in the selected range are outputted from the front or rear speakers. Note If you switch the SFEQ setting, the HPF function is automatically turned off. By turning the HPF function on after selecting the SFEQ setting, you can combine HPF function with SFEQ function. Adjusting source levels SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. ! Settings are based on the FM tuner volume level, which remains unchanged. 1 Compare the FM tuner volume level with the level of the source you wish to adjust. 2 Use Multi-Control to select SLA. SLA appears in the display. 3 Push Multi-Control up or down to adjust the source volume. Each pushing Multi-Control up or down increases or decreases the source volume. SLA +4 SLA 4 is displayed as the source volume is increased or decreased. Notes ! The AM tuner volume level can also be adjusted with source level adjustments. ! The built-in CD player and the multi-CD player are set to the same source level adjustment volume automatically. ! External unit 1 and external unit 2 are set to the same source level adjustment volume automatically. 52 En