Pioneer PD-F507 Owner's Manual - Page 9

BASIC OPERATIONS ÷ You can operate PD-F507 by remote control unit and also by the main unit. ÷ You can operate PD-F407 by the main unit. STANDBY indicator MODE Digit buttons MODE DISC SET TRACK SET 41/¡¢ 1¡ 7 4¢ 7 8 3 3 8 To listen in order from the first track To select the disc and track (PD-F507 only) Press STANDBY/ON. To turn the power off... Press STANDBY/ON again. STANDBY indicator lights. Use the digit buttons to \ select the disc, then press DISC SET. Load discs into the rack. P. 8 « Close the hood. ÷ Playback is not possible when the hood is open. Label side faces right Press 3. The tracks are played in order 3 starting from the first track on the disc with the lowest disc No. ÷ If you choose a play mode beforehand, the tracks/discs are played back according to the respective play mode. To stop play 7 Press7. To pause play 8 Press 8. To start play again, press 3 or 8. To skip to another track Tap 41/¡¢ (or 4/¢ on 41 ¡¢ the remote control unit). To fast forward/reverse. Hold down 41/¡¢ (or 41 ¡¢ 1/¡ on the remote control unit). Use the digit buttons to \ select the track, and press TRACK SET. ÷ DISC SET or TRACK SET should be pressed in less than 5 seconds after pressing the last numeric button. ÷ If the disc has not been loaded in the selected position, "** no dISC" is displayed for 3 seconds. To select a play mode Press MODE during play or stop mode. Press a few times to choose the mode you desire. Playback occurs according to the chosen mode. ALL: All discs are played back SINGLE: One disc is played back CUSTOM: Only discs stored in the CUSTOM file are played back see page P. 10 to create a custom file). In stop mode: 3 ALL 3 SINGLE CUSTOM (ΙΙΙ2 ΙΙ2 Ι)2 During playback: 3ALL 3 SINGLE ÷ When you select SINGLE during playback, only the current disc will be played. ÷ If you press MODE during program mode, the program contents will be erased. Notes!! ÷ When you turn the power ON, playback starts according to the last selected play mode. ÷ If you did not select a play mode, playback starts in ALL. When you press 7 or turn the power OFF, the unit memorizes the disc that was being played. The next time you press 3, playback will start from that same disc. BASIC OPERATIONS 9 En